Dear Tom Rix,
In message <4bdca234.9010...@bumblecow.com> you wrote:
> Wolfgang,
> Please pull from arm/master.
> Tom
>
> The following changes since commit 3699c28e6d16b563629c285311a0ce62a2c4c5d0:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-video
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Alexander Holler (1):
> at91: add defines for RTT and GPBR
>
> Asen Dimov (5):
> pm9261 converted to at91 soc access
> pm9261: remove CONFIG_CMD_AUTOSCRIPT
> pm9263: remove CONFIG_CMD_AUTOSCRIPT
> at91: define matrix registers bit fields
> pm9263 converted to at91 soc access
>
> Fabio Estevam (1):
> MX51EVK: Remove CPLD related code
>
> Frans Meulenbroeks (2):
> configs/sheevaplug: added a few additional commands
> configs/openrd_base.h: reordered macros
>
> Heiko Schocher (2):
> arm, mx27: add support for SDHC1 pin init
> arm, i.mx27: add support for magnesium board from projectiondesign
>
> John Rigby (1):
> MX25 print arm clock instead of mpllclk on boot
>
> Minkyu Kang (2):
> SAMSUNG: serial: modify name from s5pc1xx to s5p
> SAMSUNG: make s5p common gpio functions
>
> Siddarth Gore (1):
> Marvell GuruPlug Board Support
>
> Stefano Babic (9):
> Moved board specific values in config file
> mkimage: correct spelling error in imximage
> mx51evk: correct list of possible BOOT_FROM values
> MX31: add accessor function to get a gpio
> MX31: add pin definitions for NAND controller
> MX31: Add support for NAND to QONG board
> MX31: Support 128MB RAM on QONG module
> MX31: Add UBI support to QONG module
> MX31: Removed erroneous board name from QONG
>
> trix (1):
> ARM Update mach-types
>
> MAINTAINERS | 8 +
> MAKEALL | 2 +
> Makefile | 4 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/generic.c | 17 +
> arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S | 5 +-
> arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile | 1 -
> arch/arm/include/asm/arch-at91/at91_matrix.h | 138 +++
> arch/arm/include/asm/arch-at91/at91sam9260.h | 2 +
> arch/arm/include/asm/arch-at91/at91sam9261.h | 2 +
> arch/arm/include/asm/arch-at91/at91sam9263.h | 3 +
> arch/arm/include/asm/arch-mx27/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx31/mx31-regs.h | 15 +
> arch/arm/include/asm/arch-mx31/mx31.h | 5 +
> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 192 ++--
> arch/arm/include/asm/arch-s5pc1xx/uart.h | 2 +-
> arch/arm/include/asm/mach-types.h | 986
> +++++++++++++++++++-
> board/Marvell/guruplug/Makefile | 51 +
> board/Marvell/guruplug/config.mk | 27 +
> board/Marvell/guruplug/guruplug.c | 167 ++++
> board/Marvell/guruplug/guruplug.h | 39 +
> board/Marvell/guruplug/kwbimage.cfg | 162 ++++
> board/davedenx/qong/lowlevel_init.S | 130 ++-
> board/davedenx/qong/qong.c | 95 ++-
> board/davedenx/qong/qong_fpga.h | 4 +-
> board/freescale/mx51evk/imximage.cfg | 2 +-
> board/freescale/mx51evk/mx51evk.c | 67 --
> board/freescale/mx51evk/mx51evk.h | 1 -
> board/logicpd/imx27lite/imx27lite.c | 18 +-
> board/ronetix/pm9261/led.c | 18 +-
> board/ronetix/pm9261/pm9261.c | 152 ++--
> board/ronetix/pm9263/led.c | 15 +-
> board/ronetix/pm9263/pm9263.c | 195 ++--
> common/serial.c | 16 +-
> drivers/gpio/Makefile | 1 +
> drivers/gpio/mx31_gpio.c | 15 +
> .../s5pc1xx/gpio.c => drivers/gpio/s5p_gpio.c | 16 +-
> drivers/serial/Makefile | 2 +-
> drivers/serial/{serial_s5pc1xx.c => serial_s5p.c} | 30 +-
> include/configs/guruplug.h | 198 ++++
> include/configs/imx27lite-common.h | 237 +++++
> include/configs/imx27lite.h | 200 +----
> include/configs/magnesium.h | 71 ++
> include/configs/mx51evk.h | 3 +
> include/configs/openrd_base.h | 4 +-
> include/configs/pm9261.h | 69 +-
> include/configs/pm9263.h | 88 +-
> include/configs/qong.h | 40 +-
> include/configs/sheevaplug.h | 27 +-
> include/serial.h | 8 +-
> tools/imximage.c | 2 +-
> 51 files changed, 2817 insertions(+), 738 deletions(-)
> create mode 100644 board/Marvell/guruplug/Makefile
> create mode 100644 board/Marvell/guruplug/config.mk
> create mode 100644 board/Marvell/guruplug/guruplug.c
> create mode 100644 board/Marvell/guruplug/guruplug.h
> create mode 100644 board/Marvell/guruplug/kwbimage.cfg
> rename arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c => drivers/gpio/s5p_gpio.c
> (82%)
> rename drivers/serial/{serial_s5pc1xx.c => serial_s5p.c} (83%)
> create mode 100644 include/configs/guruplug.h
> create mode 100644 include/configs/imx27lite-common.h
> create mode 100644 include/configs/magnesium.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The explanation requiring the fewest assumptions is the most likely
to be correct. -- William of Occam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
