This patchset update Stratix 10 SDRAM driver to support: - Multi-banks memory (Patch [1-8]) - Stratix 10 support up to 2 memory banks: Bank 0: Address 0, size 2GB Bank 1: Address 0x100000000, size 124GB - Add warm reset boot checking function, to use in patch [10] (Patch[9]) - Add ECC memory scrubbing support (Patch [10]) - Use cache enabled + "DC ZVA" instruction to clear memory to zeros
Ley Foon Tan (10): ddr: altera: stratix10: Move SDRAM size check to SDRAM driver arm: socfpga: Add sdram_s10.h to sdram.h ddr: altera: s10: Add multiple memory banks support arm: socfpga: Update dram_init_banksize() for Stratix10 board: altera: Stratix10: Add board_get_usable_ram_top() board: altera: Stratix10: Add ft_board_setup() arm: socfpga: Enable OF_BOARD_SETUP for Stratix 10 configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2 arm: socfpga: stratix10: Add cpu_has_been_warmreset() ddr: altera: Stratix10: Add ECC memory scrubbing arch/arm/mach-socfpga/Kconfig | 1 + arch/arm/mach-socfpga/board.c | 16 +- .../include/mach/reset_manager_s10.h | 3 + arch/arm/mach-socfpga/include/mach/sdram.h | 2 + .../arm/mach-socfpga/include/mach/sdram_s10.h | 10 + arch/arm/mach-socfpga/reset_manager_s10.c | 9 + arch/arm/mach-socfpga/spl_s10.c | 11 -- board/altera/stratix10-socdk/socfpga.c | 37 ++++ configs/socfpga_stratix10_defconfig | 2 +- drivers/ddr/altera/sdram_s10.c | 178 ++++++++++++++++++ 10 files changed, 256 insertions(+), 13 deletions(-) -- 2.19.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot