Thomas Chou wrote: > This patch adds gpio support of Altera PIO component to the > nios2-generic board. Though it drives only gpio_led at the > moment, it supports bidirectional port to control bit-banging > I2C, NAND flash busy status or button switches, etc. > > Signed-off-by: Thomas Chou <tho...@wytron.com.tw> > --- > v3: split patches for gpio and spi, based gpio on altera pio core. > v2: remove mmc_spi_init() > > board/altera/nios2-generic/Makefile | 1 + > board/altera/nios2-generic/gpio.c | 55 > +++++++++++++++++++++++++++++++++++ > include/configs/nios2-generic.h | 6 ++-- > 3 files changed, 59 insertions(+), 3 deletions(-) > create mode 100644 board/altera/nios2-generic/gpio.c > > diff --git a/board/altera/nios2-generic/Makefile > b/board/altera/nios2-generic/Makefile > index 6780872..d1fca70 100644 > --- a/board/altera/nios2-generic/Makefile > +++ b/board/altera/nios2-generic/Makefile > @@ -32,6 +32,7 @@ LIB = $(obj)lib$(BOARD).a > COBJS-y := $(BOARD).o > COBJS-$(CONFIG_CMD_IDE) += ../common/cfide.o > COBJS-$(CONFIG_EPLED) += ../common/epled.o > +COBJS-$(CONFIG_GPIO) += gpio.o > COBJS-$(CONFIG_SEVENSEG) += ../common/sevenseg.o
This will build a u-boot image that will not work with any of the standard configurations ... correct? ... since the GPIO component is custom (not supplied by the vendor)? --Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
