Hello Tom/Wolfgang,
Didn't see any feedbacks on this patchset.
Please let me know if the patch is good or should I make changes and resubmit
Thanks in advance
Regards
Vipin
On 4/26/2010 8:26 AM, Vipin KUMAR wrote:
> Hi,
> The following subpatches incorporate review comments given on patch-set v1.
> Please consider it for inclusion in mainline
>
> Thanks and Regards
> Vipin
>
> Vipin Kumar (17):
> u-boot.img file not created when srctree and objtree are different
> change_bit routine defined
> SPEAr : SMI erase and write timeouts increased
> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET
> SPEAr : Reducing the max RAM size to 128MB
> SPEAr : Basic arch related support added for SPEAr SoCs
> SPEAr : Network driver support added
> SPEAr : Network support configured for spear SoCs
> SPEAr : macb driver support added for spear310 and spear320
> SPEAr : FSMC driver support added
> SPEAr : Configuring FSMC driver for NAND interface
> SPEAr : i2c driver moved completely into drivers/i2c
> SPEAr : smi driver moved completely into drivers/mtd
> SPEAr : USBD driver support added
> SPEAr : Basic spear1300 architecture support added
> SPEAr : spear1300 SoC support added
> SPEAr : Supporting various configurations for spear3xx and spear6xx
> boards
>
> Makefile | 24 +-
> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/spear/cpu.c | 76 +++
> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++
> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 112 ++++
> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 99 ++++
> .../arm_cortexa8/spear13xx/reset.c} | 50 +--
> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 136 +++++
> arch/arm/include/asm/arch-spear/clk.h | 27 +
> arch/arm/include/asm/arch-spear/hardware.h | 16 +-
> arch/arm/include/asm/arch-spear/spr_misc.h | 5 +
> arch/arm/include/asm/arch-spear13xx/hardware.h | 40 ++
> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 +++
> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++
> arch/arm/include/asm/arch-spear13xx/sys_proto.h | 32 ++
> arch/arm/include/asm/bitops.h | 11 +-
> board/spear/common/Makefile | 10 +-
> board/spear/common/spr_misc.c | 23 +-
> board/spear/spear1300/Makefile | 51 ++
> board/spear/spear1300/config.mk | 28 +
> board/spear/spear1300/spear1300.c | 86 ++++
> .../spear/spear1300/spr_lowlevel_init.S | 49 +--
> board/spear/spear300/config.mk | 11 -
> board/spear/spear300/spear300.c | 10 +-
> board/spear/spear310/config.mk | 11 -
> board/spear/spear310/spear310.c | 17 +-
> board/spear/spear320/config.mk | 11 -
> board/spear/spear320/spear320.c | 14 +-
> board/spear/spear600/config.mk | 11 -
> board/spear/spear600/spear600.c | 10 +-
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +-
> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
> drivers/mtd/Makefile | 2 +-
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/fsmc_nand.c | 365 +++++++++++++
> drivers/mtd/nand/spr_nand.c | 124 -----
> drivers/mtd/{spr_smi.c => st_smi.c} | 10 +-
> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 10 +-
> drivers/net/Makefile | 1 +
> drivers/net/designware.c | 537
> ++++++++++++++++++++
> drivers/net/designware.h | 264 ++++++++++
> drivers/serial/usbtty.h | 4 +-
> drivers/usb/gadget/Makefile | 2 +-
> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++--
> include/configs/spear-common.h | 27 +-
> include/configs/spear13xx.h | 199 ++++++++
> include/configs/spear3xx.h | 30 ++
> include/configs/spear6xx.h | 13 +
> include/linux/mtd/fsmc_nand.h | 104 ++++
> include/netdev.h | 1 +
> include/usb/{spr_udc.h => designware_udc.h} | 8 +-
> 52 files changed, 2918 insertions(+), 340 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c
> copy arch/arm/{include/asm/arch-spear/spr_nand.h =>
> cpu/arm_cortexa8/spear13xx/reset.c} (51%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c
> create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/hardware.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h
> create mode 100644 arch/arm/include/asm/arch-spear13xx/sys_proto.h
> create mode 100644 board/spear/spear1300/Makefile
> create mode 100644 board/spear/spear1300/config.mk
> create mode 100644 board/spear/spear1300/spear1300.c
> rename arch/arm/include/asm/arch-spear/spr_nand.h =>
> board/spear/spear1300/spr_lowlevel_init.S (50%)
> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%)
> rename arch/arm/include/asm/arch-spear/spr_i2c.h =>
> drivers/i2c/designware_i2c.h (98%)
> create mode 100644 drivers/mtd/nand/fsmc_nand.c
> delete mode 100644 drivers/mtd/nand/spr_nand.c
> rename drivers/mtd/{spr_smi.c => st_smi.c} (99%)
> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h
> (95%)
> create mode 100644 drivers/net/designware.c
> create mode 100644 drivers/net/designware.h
> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%)
> create mode 100644 include/configs/spear13xx.h
> create mode 100644 include/linux/mtd/fsmc_nand.h
> rename include/usb/{spr_udc.h => designware_udc.h} (98%)
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
