On 2/21/19 7:26 AM, AKASHI Takahiro wrote:
> "env [print|set] -e" allows for handling uefi variables without
> knowing details about mapping to corresponding u-boot variables.
>
> Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org>
> ---
> MAINTAINERS | 1 +
> cmd/Kconfig | 10 ++
> cmd/Makefile | 1 +
> cmd/nvedit.c | 28 +++-
> cmd/nvedit_efi.c | 395 ++++++++++++++++++++++++++++++++++++++++++++++
> include/command.h | 8 +
> 6 files changed, 442 insertions(+), 1 deletion(-)
> create mode 100644 cmd/nvedit_efi.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f1f8818d6ba8..0cce9db2660e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -471,6 +471,7 @@ F: lib/efi*/
> F: test/py/tests/test_efi*
> F: test/unicode_ut.c
> F: cmd/bootefi.c
> +F: cmd/nvedit_efi.c
> F: tools/file2include.c
>
> FPGA
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 3ea42e425611..ddcdee44538d 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -420,6 +420,16 @@ config CMD_ENV_FLAGS
> be deleted. This command shows the variables that have special
> flags.
>
> +config CMD_NVEDIT_EFI
> + bool "env [set|print] -e - set/print UEFI variables"
> + depends on EFI_LOADER
> + default y
> + imply HEXDUMP
> + help
> + UEFI variables are encoded as some form of U-Boot variables.
> + If enabled, we are allowed to set/print UEFI variables using
> + "env" command with "-e" option without knowing details.
> +
> endmenu
>
> menu "Memory commands"
> diff --git a/cmd/Makefile b/cmd/Makefile
> index a127a995394f..b9ee51869d48 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -98,6 +98,7 @@ obj-$(CONFIG_CMD_MTD) += mtd.o
> obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
> obj-$(CONFIG_CMD_NAND) += nand.o
> obj-$(CONFIG_CMD_NET) += net.o
> +obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
> obj-$(CONFIG_CMD_ONENAND) += onenand.o
> obj-$(CONFIG_CMD_OSD) += osd.o
> obj-$(CONFIG_CMD_PART) += part.o
> diff --git a/cmd/nvedit.c b/cmd/nvedit.c
> index ebaa16b75459..f798e5137d26 100644
> --- a/cmd/nvedit.c
> +++ b/cmd/nvedit.c
> @@ -119,6 +119,11 @@ static int do_env_print(cmd_tbl_t *cmdtp, int flag, int
> argc,
> int rcode = 0;
> int env_flag = H_HIDE_DOT;
>
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> + if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e')
> + return do_env_print_efi(cmdtp, flag, --argc, ++argv);
> +#endif
> +
> if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'a') {
> argc--;
> argv++;
> @@ -216,6 +221,12 @@ static int _do_env_set(int flag, int argc, char * const
> argv[], int env_flag)
> ENTRY e, *ep;
>
> debug("Initial value for argc=%d\n", argc);
> +
> +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CMD_NVEDIT_EFI)
In the Makefile you already have 'ifndef CONFIG_SPL_BUILD'.
> + if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e')
> + return do_env_set_efi(NULL, flag, --argc, ++argv);
> +#endif
> +
> while (argc > 1 && **(argv + 1) == '-') {
> char *arg = *++argv;
>
> @@ -1263,11 +1274,17 @@ static char env_help_text[] =
> "env import [-d] [-t [-r] | -b | -c] addr [size] [var ...] - import
> environment\n"
> #endif
> "env print [-a | name ...] - print environment\n"
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> + "env print -e [name ...] - print UEFI environment\n"
> +#endif
> #if defined(CONFIG_CMD_RUN)
> "env run var [...] - run commands in an environment variable\n"
> #endif
> #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
> "env save - save environment\n"
> +#endif
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> + "env set -e name [arg ...] - set UEFI variable; unset if 'arg' not
> specified\n"
> #endif
> "env set [-f] name [arg ...]\n";
> #endif
> @@ -1295,6 +1312,10 @@ U_BOOT_CMD_COMPLETE(
> printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
> "print environment variables",
> "[-a]\n - print [all] values of all environment variables\n"
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> + "printenv -e [name ...]\n"
> + " - print UEFI variable 'name' or all the variables\n"
> +#endif
> "printenv name ...\n"
> " - print value of environment variable 'name'",
> var_complete
> @@ -1322,7 +1343,12 @@ U_BOOT_CMD_COMPLETE(
> U_BOOT_CMD_COMPLETE(
> setenv, CONFIG_SYS_MAXARGS, 0, do_env_set,
> "set environment variables",
> - "[-f] name value ...\n"
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> + "-e name [value ...]\n"
> + " - set UEFI variable 'name' to 'value' ...'\n"
> + " - delete UEFI variable 'name' if 'value' not specified\n"
> +#endif
> + "setenv [-f] name value ...\n"
> " - [forcibly] set environment variable 'name' to 'value ...'\n"
> "setenv [-f] name\n"
> " - [forcibly] delete environment variable 'name'",
> diff --git a/cmd/nvedit_efi.c b/cmd/nvedit_efi.c
> new file mode 100644
> index 000000000000..aaff9f51d672
> --- /dev/null
> +++ b/cmd/nvedit_efi.c
> @@ -0,0 +1,395 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Integrate UEFI variables to u-boot env interface
> + *
> + * Copyright (c) 2018 AKASHI Takahiro, Linaro Limited
> + */
> +
> +#include <charset.h>
> +#include <common.h>
> +#include <command.h>
> +#include <efi_loader.h>
> +#include <exports.h>
> +#include <hexdump.h>
> +#include <malloc.h>
> +#include <linux/kernel.h>
> +
> +/*
> + * From efi_variable.c,
> + *
> + * Mapping between UEFI variables and u-boot variables:
> + *
> + * efi_$guid_$varname = {attributes}(type)value
> + */
> +
> +static const struct {
> + u32 mask;
> + char *text;
> +} efi_var_attrs[] = {
> + {EFI_VARIABLE_NON_VOLATILE, "NV"},
> + {EFI_VARIABLE_BOOTSERVICE_ACCESS, "BS"},
> + {EFI_VARIABLE_RUNTIME_ACCESS, "RT"},
> + {EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS, "AW"},
> + {EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS, "AT"},
> +};
> +
> +/**
> + * efi_dump_single_var() - show information about a UEFI variable
> + *
> + * @name: Name of the variable
> + * @guid: Vendor GUID
> + *
> + * Show information encoded in one UEFI variable
> + */
> +static void efi_dump_single_var(u16 *name, efi_guid_t *guid)
> +{
> + u32 attributes;
> + u8 *data;
> + efi_uintn_t size;
> + int count, i;
> + efi_status_t ret;
> +
> + data = NULL;
> + size = 0;
> + ret = efi_get_variable(name, guid, &attributes, &size, data);
Please, use EFI_CALL() when calling function which themselves call
EFI_ENTRY().
Best regards
Heinrich
> + if (ret == EFI_BUFFER_TOO_SMALL) {
> + data = malloc(size);
> + if (!data)
> + goto out;
> +
> + ret = efi_get_variable(name, guid, &attributes, &size, data);
> + }
> + if (ret == EFI_NOT_FOUND) {
> + printf("Error: \"%ls\" not defined\n", name);
> + goto out;
> + }
> + if (ret != EFI_SUCCESS)
> + goto out;
> +
> + printf("%ls:", name);
> + for (count = 0, i = 0; i < ARRAY_SIZE(efi_var_attrs); i++)
> + if (attributes & efi_var_attrs[i].mask) {
> + if (count)
> + putc('|');
> + else
> + putc(' ');
> + count++;
> + puts(efi_var_attrs[i].text);
> + }
> + printf(", DataSize = 0x%zx\n", size);
> + print_hex_dump(" ", DUMP_PREFIX_OFFSET, 16, 1, data, size, true);
> +
> + return;
> +out:
> + free(data);
> +}
> +
> +/**
> + * efi_dump_vars() - show information about named UEFI variables
> + *
> + * @argc: Number of arguments (variables)
> + * @argv: Argument (variable name) array
> + * Return: CMD_RET_SUCCESS on success, or CMD_RET_RET_FAILURE
> + *
> + * Show information encoded in named UEFI variables
> + */
> +static int efi_dump_vars(int argc, char * const argv[])
> +{
> + u16 *var_name16, *p;
> + efi_uintn_t buf_size, size;
> +
> + buf_size = 128;
> + var_name16 = malloc(buf_size);
> + if (!var_name16)
> + return CMD_RET_FAILURE;
> +
> + for (; argc > 0; argc--, argv++) {
> + size = (utf8_utf16_strlen(argv[0]) + 1) * sizeof(u16);
> + if (buf_size < size) {
> + buf_size = size;
> + p = realloc(var_name16, buf_size);
> + if (!p) {
> + free(var_name16);
> + return CMD_RET_FAILURE;
> + }
> + var_name16 = p;
> + }
> +
> + p = var_name16;
> + utf8_utf16_strcpy(&p, argv[0]);
> +
> + efi_dump_single_var(var_name16,
> + (efi_guid_t *)&efi_global_variable_guid);
> + }
> +
> + free(var_name16);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +/**
> + * efi_dump_vars() - show information about all the UEFI variables
> + *
> + * Return: CMD_RET_SUCCESS on success, or CMD_RET_RET_FAILURE
> + *
> + * Show information encoded in all the UEFI variables
> + */
> +static int efi_dump_var_all(void)
> +{
> + u16 *var_name16, *p;
> + efi_uintn_t buf_size, size;
> + efi_guid_t guid;
> + efi_status_t ret;
> +
> + buf_size = 128;
> + var_name16 = malloc(buf_size);
> + if (!var_name16)
> + return CMD_RET_FAILURE;
> +
> + var_name16[0] = 0;
> + for (;;) {
> + size = buf_size;
> + ret = efi_get_next_variable_name(&size, var_name16, &guid);
> + if (ret == EFI_NOT_FOUND)
> + break;
> + if (ret == EFI_BUFFER_TOO_SMALL) {
> + buf_size = size;
> + p = realloc(var_name16, buf_size);
> + if (!p) {
> + free(var_name16);
> + return CMD_RET_FAILURE;
> + }
> + var_name16 = p;
> + ret = efi_get_next_variable_name(&size, var_name16,
> + &guid);
> + }
> + if (ret != EFI_SUCCESS) {
> + free(var_name16);
> + return CMD_RET_FAILURE;
> + }
> +
> + efi_dump_single_var(var_name16, &guid);
> + }
> +
> + free(var_name16);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +/**
> + * do_env_print_efi() - show information about UEFI variables
> + *
> + * @cmdtp: Command table
> + * @flag: Command flag
> + * @argc: Number of arguments
> + * @argv: Argument array
> + * Return: CMD_RET_SUCCESS on success, or CMD_RET_RET_FAILURE
> + *
> + * This function is for "env print -e" or "printenv -e" command:
> + * => env print -e [var [...]]
> + * If one or more variable names are specified, show information
> + * named UEFI variables, otherwise show all the UEFI variables.
> + */
> +int do_env_print_efi(cmd_tbl_t *cmdtp, int flag, int argc, char * const
> argv[])
> +{
> + efi_status_t ret;
> +
> + /* Initialize EFI drivers */
> + ret = efi_init_obj_list();
> + if (ret != EFI_SUCCESS) {
> + printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
> + ret & ~EFI_ERROR_MASK);
> + return CMD_RET_FAILURE;
> + }
> +
> + if (argc > 1)
> + /* show specified UEFI variables */
> + return efi_dump_vars(--argc, ++argv);
> +
> + /* enumerate and show all UEFI variables */
> + return efi_dump_var_all();
> +}
> +
> +/**
> + * append_value() - encode UEFI variable's value
> + * @bufp: Buffer of encoded UEFI variable's value
> + * @sizep: Size of buffer
> + * @data: data to be encoded into the value
> + * Return: 0 on success, -1 otherwise
> + *
> + * Interpret a given data string and append it to buffer.
> + * Buffer will be realloc'ed if necessary.
> + *
> + * Currently supported formats are:
> + * =0x0123...: Hexadecimal number
> + * =H0123...: Hexadecimal-byte array
> + * ="...", =S"..." or <string>:
> + * String
> + */
> +static int append_value(char **bufp, size_t *sizep, char *data)
> +{
> + char *tmp_buf = NULL, *new_buf = NULL, *value;
> + unsigned long len = 0;
> +
> + if (!strncmp(data, "=0x", 2)) { /* hexadecimal number */
> + union {
> + u8 u8;
> + u16 u16;
> + u32 u32;
> + u64 u64;
> + } tmp_data;
> + unsigned long hex_value;
> + void *hex_ptr;
> +
> + data += 3;
> + len = strlen(data);
> + if ((len & 0x1)) /* not multiple of two */
> + return -1;
> +
> + len /= 2;
> + if (len > 8)
> + return -1;
> + else if (len > 4)
> + len = 8;
> + else if (len > 2)
> + len = 4;
> +
> + /* convert hex hexadecimal number */
> + if (strict_strtoul(data, 16, &hex_value) < 0)
> + return -1;
> +
> + tmp_buf = malloc(len);
> + if (!tmp_buf)
> + return -1;
> +
> + if (len == 1) {
> + tmp_data.u8 = hex_value;
> + hex_ptr = &tmp_data.u8;
> + } else if (len == 2) {
> + tmp_data.u16 = hex_value;
> + hex_ptr = &tmp_data.u16;
> + } else if (len == 4) {
> + tmp_data.u32 = hex_value;
> + hex_ptr = &tmp_data.u32;
> + } else {
> + tmp_data.u64 = hex_value;
> + hex_ptr = &tmp_data.u64;
> + }
> + memcpy(tmp_buf, hex_ptr, len);
> + value = tmp_buf;
> +
> + } else if (!strncmp(data, "=H", 2)) { /* hexadecimal-byte array */
> + data += 2;
> + len = strlen(data);
> + if (len & 0x1) /* not multiple of two */
> + return -1;
> +
> + len /= 2;
> + tmp_buf = malloc(len);
> + if (!tmp_buf)
> + return -1;
> +
> + if (hex2bin((u8 *)tmp_buf, data, len) < 0)
> + return -1;
> +
> + value = tmp_buf;
> + } else { /* string */
> + if (!strncmp(data, "=\"", 2) || !strncmp(data, "=S\"", 3)) {
> + if (data[1] == '"')
> + data += 2;
> + else
> + data += 3;
> + value = data;
> + len = strlen(data) - 1;
> + if (data[len] != '"')
> + return -1;
> + } else {
> + value = data;
> + len = strlen(data);
> + }
> + }
> +
> + new_buf = realloc(*bufp, *sizep + len);
> + if (!new_buf)
> + goto out;
> +
> + memcpy(new_buf + *sizep, value, len);
> + *bufp = new_buf;
> + *sizep += len;
> +
> +out:
> + free(tmp_buf);
> +
> + return 0;
> +}
> +
> +/**
> + * do_env_print_efi() - set UEFI variable
> + *
> + * @cmdtp: Command table
> + * @flag: Command flag
> + * @argc: Number of arguments
> + * @argv: Argument array
> + * Return: CMD_RET_SUCCESS on success, or CMD_RET_RET_FAILURE
> + *
> + * This function is for "env set -e" or "setenv -e" command:
> + * => env set -e var [value ...]]
> + * Encode values specified and set given UEFI variable.
> + * If no value is specified, delete the variable.
> + */
> +int do_env_set_efi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + char *var_name, *value = NULL;
> + efi_uintn_t size = 0;
> + u16 *var_name16 = NULL, *p;
> + size_t len;
> + efi_guid_t guid;
> + efi_status_t ret;
> +
> + if (argc == 1)
> + return CMD_RET_USAGE;
> +
> + /* Initialize EFI drivers */
> + ret = efi_init_obj_list();
> + if (ret != EFI_SUCCESS) {
> + printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
> + ret & ~EFI_ERROR_MASK);
> + return CMD_RET_FAILURE;
> + }
> +
> + var_name = argv[1];
> + if (argc == 2) {
> + /* delete */
> + value = NULL;
> + size = 0;
> + } else { /* set */
> + argc -= 2;
> + argv += 2;
> +
> + for ( ; argc > 0; argc--, argv++)
> + if (append_value(&value, &size, argv[0]) < 0) {
> + ret = CMD_RET_FAILURE;
> + goto out;
> + }
> + }
> +
> + len = utf8_utf16_strnlen(var_name, strlen(var_name));
> + var_name16 = malloc((len + 1) * 2);
> + if (!var_name16) {
> + ret = CMD_RET_FAILURE;
> + goto out;
> + }
> + p = var_name16;
> + utf8_utf16_strncpy(&p, var_name, len + 1);
> +
> + guid = efi_global_variable_guid;
> + ret = efi_set_variable(var_name16, &guid,
> + EFI_VARIABLE_BOOTSERVICE_ACCESS |
> + EFI_VARIABLE_RUNTIME_ACCESS, size, value);
> + ret = (ret == EFI_SUCCESS ? CMD_RET_SUCCESS : CMD_RET_FAILURE);
> +out:
> + free(value);
> + free(var_name16);
> +
> + return ret;
> +}
> diff --git a/include/command.h b/include/command.h
> index 461b17447c0d..2e24e8ad3eef 100644
> --- a/include/command.h
> +++ b/include/command.h
> @@ -139,6 +139,14 @@ extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int
> argc, char * const argv[]
>
> extern unsigned long do_go_exec(ulong (*entry)(int, char * const []), int
> argc,
> char * const argv[]);
> +
> +#if defined(CONFIG_CMD_NVEDIT_EFI)
> +extern int do_env_print_efi(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[]);
> +extern int do_env_set_efi(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[]);
> +#endif
> +
> /*
> * Error codes that commands return to cmd_process(). We use the standard 0
> * and 1 for success and failure, but add one more case - failure with a
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
