> -----Original Message----- > From: Peng Ma > Sent: Wednesday, January 30, 2019 4:32 PM > To: albert.u.b...@aribaud.net; York Sun <york....@nxp.com> > Cc: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>; VINITHA V PILLAI > <vinitha.pil...@nxp.com>; Prabhakar Kushwaha > <prabhakar.kushw...@nxp.com>; Rajesh Bhagat > <rajesh.bha...@nxp.com>; feng.l...@nxp.com; Alison Wang > <alison.w...@nxp.com>; sumit.g...@nxp.com; Mingkai Hu > <mingkai...@nxp.com>; Ruchika Gupta <ruchika.gu...@nxp.com>; Udit > Agarwal <udit.agar...@nxp.com>; Ashish Kumar <ashish.ku...@nxp.com>; > Priyanka Jain <priyanka.j...@nxp.com>; sriram.d...@nxp.com; Z.q. Hou > <zhiqiang....@nxp.com>; Pankit Garg <pankit.g...@nxp.com>; > aford...@gmail.com; mario....@gdsys.cc; Yinbo Zhu <yinbo....@nxp.com>; > siva.durga.palad...@xilinx.com; joe.hershber...@ni.com; > jgeb...@sweptlaser.com; Andy Tang <andy.t...@nxp.com>; u- > b...@lists.denx.de; Peng Ma <peng...@nxp.com> > Subject: [PATCH 1/7] armv8: fsl-layerscape: ls1043a: move SCSI_AHCI and > SCSI form arch/arm/cpu/armv8/fsl-layerscape/Kconfig to arch/arm/Kconfig > > remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface > support. > this changed is to fixed the ls1043ardb compile warning as fallows: > ===================== WARNING ====================== This > board does not use CONFIG_DM_SCSI. Please update the storage controller > to use CONFIG_DM_SCSI before the > v2019.07 release. Failure to update by the deadline may result in board > removal.See doc/driver-model/MIGRATION.txt for more info. > ==================================================== > > Signed-off-by: Peng Ma <peng...@nxp.com>
This patch-set including 7 patches been applied to fsl-qoriq master, awaiting upstream. --pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
