Provides initial support for TI OMAP-L138/DA850 SoC devices
on a Logic PD EVM board.

Signed-off-by: Sudhakar Rajashekhara <sudhakar....@ti.com>
---
 MAINTAINERS                |    4 +
 MAKEALL                    |    1 +
 Makefile                   |    3 +
 include/configs/da850evm.h |  135 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 143 insertions(+), 0 deletions(-)
 create mode 100644 include/configs/da850evm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index a5d5835..c52803d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -758,6 +758,10 @@ Nick Thompson <nick.thomp...@gefanuc.com>
 
        da830evm        ARM926EJS (DA830/OMAP-L137)
 
+Sudhakar Rajashekhara <sudhakar....@ti.com>
+
+       da850evm        ARM926EJS (DA850/OMAP-L138)
+
 Albin Tonnerre <albin.tonne...@free-electrons.com>
 
        sbc35_a9g20     ARM926EJS (AT91SAM9G20 SoC)
diff --git a/MAKEALL b/MAKEALL
index 34bc4a1..cdb6676 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -559,6 +559,7 @@ LIST_ARM9="                 \
        cp946es                 \
        cp966                   \
        da830evm                \
+       da850evm                \
        edb9301                 \
        edb9302                 \
        edb9302a                \
diff --git a/Makefile b/Makefile
index 393b180..0f21db6 100644
--- a/Makefile
+++ b/Makefile
@@ -2913,6 +2913,9 @@ cp922_XA10_config \
 cp1026_config: unconfig
        @board/armltd/integrator/split_by_variant.sh cp $@
 
+da850evm_config:       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci
+
 da830evm_config:       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci
 
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
new file mode 100644
index 0000000..2fcc76d
--- /dev/null
+++ b/include/configs/da850evm.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <k...@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Board
+ */
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MACH_DAVINCI_DA850_EVM
+#define CONFIG_ARM926EJS               /* arm926ejs CPU core */
+#define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
+#define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
+#define CONFIG_SYS_OSCIN_FREQ          24000000
+#define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
+#define CONFIG_SYS_HZ                  1000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
+
+/*
+ * Memory Info
+ */
+#define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
+#define CONFIG_SYS_GBL_DATA_SIZE       128 /* reserved for initial data */
+#define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
+#define PHYS_SDRAM_1_SIZE      (64 << 20) /* SDRAM size 64MB */
+#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1 + 0x2000000 /* memtest 
start addr */
+#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 0x2000000 + 
16*1024*1024) /* 16MB test */
+#define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE       (256*1024) /* regular stack */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of 
UART2 */
+#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
+#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
+#define CONFIG_BAUDRATE                115200          /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * I2C Configuration
+ */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED           25000
+#define CONFIG_SYS_I2C_SLAVE           10 /* Bogus, master-only in U-Boot */
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_BOOTFILE                "uImage" /* Boot file name */
+#define CONFIG_SYS_PROMPT      "DA850-evm > " /* Command Prompt */
+#define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/*
+ * Linux Information
+ */
+#define LINUX_BOOT_PARAM_ADDR  (CONFIG_SYS_MEMTEST_START + 0x100)
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS                \
+       "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTDELAY       3
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+
+#ifndef CONFIG_DRIVER_TI_EMAC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PING
+#endif
+
+#if !defined(CONFIG_USE_NAND) && \
+       !defined(CONFIG_USE_NOR) && \
+       !defined(CONFIG_USE_SPIFLASH)
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_SIZE                (16 << 10)
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ENV
+#endif
+
+#endif /* __CONFIG_H */
-- 
1.5.6

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to