The log level numbers in the Kconfig are not actually correct. Fix them
and also add a missing space in the header-file comment.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Add new patch to fix up Kconfig log level names
common/Kconfig | 66 ++++++++++++++++++++++++++++----------------------
include/log.h | 2 +-
2 files changed, 38 insertions(+), 30 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig
index 0a14bdedaa6..849d8ff90ad 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -286,14 +286,16 @@ config LOGLEVEL
All Messages with a loglevel smaller than the console loglevel will
be compiled in. The loglevels are defined as follows:
- 0 (KERN_EMERG) system is unusable
- 1 (KERN_ALERT) action must be taken immediately
- 2 (KERN_CRIT) critical conditions
- 3 (KERN_ERR) error conditions
- 4 (KERN_WARNING) warning conditions
- 5 (KERN_NOTICE) normal but significant condition
- 6 (KERN_INFO) informational
- 7 (KERN_DEBUG) debug-level messages
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
+ 7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config SPL_LOGLEVEL
int
@@ -482,14 +484,16 @@ config LOG_MAX_LEVEL
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config SPL_LOG_MAX_LEVEL
int "Maximum log level to record in SPL"
@@ -500,14 +504,16 @@ config SPL_LOG_MAX_LEVEL
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config TPL_LOG_MAX_LEVEL
int "Maximum log level to record in TPL"
@@ -518,14 +524,16 @@ config TPL_LOG_MAX_LEVEL
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config LOG_CONSOLE
bool "Allow log output to the console"
diff --git a/include/log.h b/include/log.h
index d7f64710061..33e99ab7030 100644
--- a/include/log.h
+++ b/include/log.h
@@ -14,7 +14,7 @@
/** Log levels supported, ranging from most to least important */
enum log_level_t {
- LOGL_EMERG = 0, /*U-Boot is unstable */
+ LOGL_EMERG = 0, /* U-Boot is unstable */
LOGL_ALERT, /* Action must be taken immediately */
LOGL_CRIT, /* Critical conditions */
LOGL_ERR, /* Error that prevents something from working */
--
2.21.0.rc0.258.g878e2cd30e-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
