As the I2C2 clock is now enabled in the generic clock code, we can remove
this code from a board file.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
Changes in v4: None
Changes in v3:
- New patch (separate board code patch)
Changes in v2: None
board/phytec/pcm052/pcm052.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c
index f988af2abc..cfc8009102 100644
--- a/board/phytec/pcm052/pcm052.c
+++ b/board/phytec/pcm052/pcm052.c
@@ -485,7 +485,7 @@ static void clock_init(void)
clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
- CCM_CCGR10_NFC_CTRL_MASK | CCM_CCGR10_I2C2_CTRL_MASK);
+ CCM_CCGR10_NFC_CTRL_MASK);
clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
