On Wed, 13 Feb 2019 at 12:24, Tom Rini <tr...@konsulko.com> wrote: > > On Wed, Feb 13, 2019 at 02:28:54PM +0530, Manivannan Sadhasivam wrote: > > > Current Hikey configuration allows us to store u-boot environment on uSD > > card. But this will be useless if uSD card is not inserted, hence use > > the onboard eMMC memory for storing environment at Boot1 partition. > > While we are at it, let's increase the boot delay to 10s also. > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org> > > It's your board, but do you _really_ want 10s? We moved a whole bunch > of boards down from 10s a long time ago as 2-3s isn't hard to break in > to for users nor QA testing
Yes. 10 seconds is required. 2 or 3 seconds is not enough to break in for automated QA testing. We are aiming for maximum reliability here. 2 or 3 seconds causes ~25% failure rate. 5 seconds causes ~10% failure rate. 10 seconds removes this element. (Estimates based on about a million LAVA test jobs across 50 different types of devices across multiple instances in multiple locations.) > -- > Tom -- Neil Williams ============= neil.willi...@linaro.org http://www.linux.codehelp.co.uk/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
