> > Hi all, > > We have NAND Flash in our Custom board. My Question is - will it work > straight away, or I have add support. > > If I need to add support. Could some one suggestion which part of the > code should I touch. > > > We are using TI DM355 processor. DM355 support is present in U-Boot. If you have not made any changes to the EMIF NAND on your board compared to the DM355 EVM, the NAND driver present in U-Boot will work.
If you have made changes then you might have to modify the DaVinci NAND driver, especially the ALE/CLE if they are different from the DM355 EVM. > > Thanks > Thalib _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
