Hi Hannes,
On 07.02.19 18:14, Hannes Schmelzer wrote:
>
> On 2/7/19 5:47 PM, Felix Brack wrote:
>> Hi Hannes,
> Hi Felix,
>> On 06.02.19 12:49, Hannes Schmelzer wrote:
>>> commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
>>> did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
>>> introduced with
>>> commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
>>>
>>> Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
>>> because they cannot bind/probe the boot-media interface during SPL
>>> stage.
>>>
>> Not all boards were broken, only those not having set that property in
>> their proper -u-boot.dtsi or dts file (like am335x-pdu001-u-boot.dtsi).
> true.
>>> This commit introduces the 'am33xx-u-boot.dtsi' which is included with
>>> the auto include mechanism. The am33xx-u-boot-dtsi adds the important
>>> "u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
>>> peripherals, at least the bootable ones).
>>>
>> If the new am33xx-u-boot.dtsi file gets include automatically then
>> setting the same property in the board specific dts/dtsi file is
>> redundant. Hence please remove the property from those files (like from
>> am335x-pdu001-u-boot.dtsi) and add those modified files to your patch.
>> Thus we have one single patch fixing this issue. Many thanks!
>>
>> retards Felix
> Nope.
> If i understood the mechanism correctly the mechanism searches
> this way:
>
> <dts>-u-boot.dtsi where <dts> is the base name of the .dts file
> <CONFIG_SYS_SOC>-u-boot.dtsi
> <CONFIG_SYS_CPU>-u-boot.dtsi
> <CONFIG_SYS_VENDOR>-u-boot.dtsi
> u-boot.dtsi
>
> and stops after the first match.
Agreed, you are absolutely right. I should have remembered that since I
already had some problems with this mechanism ;-).
> In your case: *am335x-pdu001*-u-boot.dtsi
>
I have decided to put the U-Boot specific properties into the above
mentioned file to make sure I can keep the exact same DTS file in U-Boot
and Linux, which simplifies the synchronization.
> Have a look, to: tools/binman/README
>
> So i still think, that my patch is on the right track.
>
>>> The peripherials (mmc, spi, ...) needed during SPL stage need to be
>>> equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.
>>>
>>> Signed-off-by: Hannes Schmelzer <hannes.schmel...@br-automation.com>
>>>
>>> ---
>>>
>>> Changes in v2:
>>> - use u-boot,dm-pre-reloc instead u-boot,dm-spl
>>> - add am33xx-u-boot.dtsi instead modifying the am33xx.dtsi
>>>
>>> arch/arm/dts/am33xx-u-boot.dtsi | 11 +++++++++++
>>> 1 file changed, 11 insertions(+)
>>> create mode 100644 arch/arm/dts/am33xx-u-boot.dtsi
>>>
>>> diff --git a/arch/arm/dts/am33xx-u-boot.dtsi
>>> b/arch/arm/dts/am33xx-u-boot.dtsi
>>> new file mode 100644
>>> index 0000000..78f5e2c
>>> --- /dev/null
>>> +++ b/arch/arm/dts/am33xx-u-boot.dtsi
>>> @@ -0,0 +1,11 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (C) 2019 B&R Industrial Automation GmbH -
>>> + * https://www.br-automation.com/
>>> + */
>>> +
>>> +/ {
>>> + ocp {
>>> + u-boot,dm-pre-reloc;
>>> + };
>>> +};
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot@lists.denx.de
>> https://lists.denx.de/listinfo/u-boot
>
regards Felix
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
