Fabio Estevam wrote: > Fix MX51 CPU detect message. > > Original string was: > CPU: Freescale i.MX51 family 3.0V at 800 MHz > > which can be misinterpreted as 3.0 Volts instead of the silicon revision. > > ,change it to: > CPU: Freescale i.MX51 family rev3.0 at 800 MHz > > Signed-off-by: Fabio Estevam <[email protected]> > > --- > arch/arm/cpu/arm_cortexa8/mx51/soc.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/cpu/arm_cortexa8/mx51/soc.c > b/arch/arm/cpu/arm_cortexa8/mx51/soc.c > index 2a139b2..f22ebe9 100644 > --- a/arch/arm/cpu/arm_cortexa8/mx51/soc.c > +++ b/arch/arm/cpu/arm_cortexa8/mx51/soc.c > @@ -67,7 +67,7 @@ int print_cpuinfo(void) > u32 cpurev; > > cpurev = get_cpu_rev(); > - printf("CPU: Freescale i.MX51 family %d.%dV at %d MHz\n", > + printf("CPU: Freescale i.MX51 family rev%d.%d at %d MHz\n", > (cpurev & 0xF0) >> 4, > (cpurev & 0x0F) >> 4, > mxc_get_clock(MXC_ARM_CLK) / 1000000);
Applied to u-boot-imx, thanks. Regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
