On Fri, 1 Feb 2019 16:40:11 +0000 Abel Vesa <abel.v...@nxp.com> wrote:
> Since the fsl_esdhc will also be used by SPL, make the
> preprocessor switches more generic to allow any kind of build.
>
The same here - as with ehci-mx6.
Thanks Abel for this patch.
Reviewed-by: Lukasz Majewski <lu...@denx.de>
> Signed-off-by: Abel Vesa <abel.v...@nxp.com>
> ---
> drivers/mmc/fsl_esdhc.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 21fa2ab..9e34557 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
> case MMC_SIGNAL_VOLTAGE_330:
> if (priv->vs18_enable)
> return -EIO;
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
> ret = regulator_set_value(priv->vqmmc_dev,
> 3300000); if (ret) {
> @@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
>
> return -EAGAIN;
> case MMC_SIGNAL_VOLTAGE_180:
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
> ret = regulator_set_value(priv->vqmmc_dev,
> 1800000); if (ret) {
> @@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
> int node = dev_of_offset(dev);
> struct esdhc_soc_data *data =
> (struct esdhc_soc_data *)dev_get_driver_data(dev);
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> struct udevice *vqmmc_dev;
> #endif
> fdt_addr_t addr;
> @@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>
> priv->vs18_enable = 0;
>
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> /*
> * If emmc I/O has a fixed voltage at 1.8V, this must be
> provided,
> * otherwise, emmc will work abnormally.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpc_0lBF3Osq.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
