Raspberry Pi bootloader adds this node to fdt, but if u-boot script
doesn't reuse the tree provided by it, this information is lost.

Revision and serial are displayed in /proc/cpuinfo after boot.

Thanks to Ricardo Salveti from Foundries.io for the idea.

Signed-off-by: Anton Gerasimov <anton.gerasi...@here.com>
---
 board/raspberrypi/rpi/rpi.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 153a1fdcb7..5b14c48dd0 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -238,6 +238,8 @@ static uint32_t rev_scheme;
 static uint32_t rev_type;
 static const struct rpi_model *model;
 
+uint64_t serial;
+
 #ifdef CONFIG_ARM64
 static struct mm_region bcm2837_mem_map[] = {
        {
@@ -381,8 +383,8 @@ static void set_serial_number(void)
                return;
        }
 
-       snprintf(serial_string, sizeof(serial_string), "%016llx",
-                msg->get_board_serial.body.resp.serial);
+       serial = msg->get_board_serial.body.resp.serial;
+       snprintf(serial_string, sizeof(serial_string), "%016llx", serial);
        env_set("serial#", serial_string);
 }
 
@@ -475,6 +477,29 @@ void *board_fdt_blob_setup(void)
        return (void *)fw_dtb_pointer;
 }
 
+static int ft_add_revision_info(void *blob) {
+       int off;
+       int ret;
+
+       off = fdt_subnode_offset(blob, 0, "system");
+
+       if (off < 0) {
+               off = fdt_add_subnode(blob, 0, "system");
+               if (off < 0)
+                       return -1;
+       }
+
+       ret = fdt_setprop_u64(blob, off, "linux,serial", serial);
+       if (ret < 0)
+               return -1;
+
+       ret = fdt_setprop_u32(blob, off, "linux,revision", revision);
+       if (ret < 0)
+               return -1;
+
+       return 0;
+}
+
 int ft_board_setup(void *blob, bd_t *bd)
 {
        /*
@@ -484,6 +509,8 @@ int ft_board_setup(void *blob, bd_t *bd)
         */
        lcd_dt_simplefb_add_node(blob);
 
+       ft_add_revision_info(blob);
+
 #ifdef CONFIG_EFI_LOADER
        /* Reserve the spin table */
        efi_add_memory_map(0, 1, EFI_RESERVED_MEMORY_TYPE, 0);
-- 
2.19.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to