Dear Wolfgang Wegner,
In message <1272026324-18566-1-git-send-email-w.weg...@astro-kom.de> you wrote:
> This patch adds bootcount for Freescale MCF5445x. Two registers of
> eDMA transfer control descriptors (TCD[1]) are used because these
> are unused by linux kernel (freescale LTIB linux-2.6.25) and were
> tested to keep their contents across resets.
...
> +#ifdef CONFIG_BOOTCOUNT_LIMIT
> +/*
> + * We use transfer descriptor registers as a persistent storage
> + * across resets. This was tested on a MCF54455.
> + * Neither U-Boot nor the stock LTIB kernel seem to use
> + * TCD[1], so it should be safe at least until application
> + * start.
This is not sufficent, then. The bootcounter requires to be reset from
User Space, i. e. _after_ the application has been succesfully
started. If application start messes with the value, this fails to
work.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
"The combination of a number of things to make existence worthwhile."
"Yes, the philosophy of 'none,' meaning 'all.'"
-- Spock and Lincoln, "The Savage Curtain", stardate 5906.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
