These nodes are required by mx53ppd when built with CONFIG_DM_MMC=y.
They are copied from Linux 4.20.5.
Signed-off-by: Ian Ray <ian....@ge.com>
---
arch/arm/dts/imx53.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index e13009c..0fd4acc 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -33,6 +33,8 @@
i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
};
tzic: tz-interrupt-controller@fffc000 {
@@ -86,6 +88,30 @@
bus-width = <4>;
status = "disabled";
};
+
+ esdhc3: esdhc@50020000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ clocks = <&clks
IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks
IMX5_CLK_ESDHC3_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc4: esdhc@50024000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ clocks = <&clks
IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks
IMX5_CLK_ESDHC4_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
};
iomuxc: iomuxc@53fa8000 {
--
2.10.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
