Enable all the necessary configs for SPL DM and FIT support for mx6sabreauto.
Signed-off-by: Abel Vesa <abel.v...@nxp.com> --- configs/mx6sabreauto_defconfig | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index 4bdcbb1..6a4d3a4 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -11,12 +11,19 @@ CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_NXP_BOARD_REVISION=y CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT=y +CONFIG_SPL_FIT_PRINT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOUNCE_BUFFER=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y @@ -40,8 +47,15 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabreauto" +CONFIG_OF_LIST="imx6dl-sabreauto imx6q-sabreauto imx6qp-sabreauto" +CONFIG_MULTI_DTB_FIT=y +CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y CONFIG_DM_MMC=y @@ -68,4 +82,3 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_VIDEO=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
