Hi, I'm trying to build u-boot in docker on osx (installed build-essentials + gcc-arm) but hit this issue (with verbose make) during config phase. I tried same on linux and it works fine. Any ideas what can cause this (or how to debug)?
make ARCH=arm rpi_0_w_defconfig V=1 make -f ./scripts/Makefile.build obj=scripts/basic cc -Wp,-MD,scripts/basic/.fixdep.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o scripts/basic/fixdep scripts/basic/fixdep.c rm -f .tmp_quiet_recordmcount make -f ./scripts/Makefile.build obj=scripts/kconfig rpi_0_w_defconfig cc -Wp,-MD,scripts/kconfig/.conf.o.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -DCURSES_LOC="<curses.h>" -DLOCALE -c -o scripts/kconfig/conf.o scripts/kconfig/conf.c cc -Wp,-MD,scripts/kconfig/.zconf.tab.o.d -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -DCURSES_LOC="<curses.h>" -DLOCALE -Iscripts/kconfig -c -o scripts/kconfig/zconf.tab.o scripts/kconfig/zconf.tab.c cc -o scripts/kconfig/conf scripts/kconfig/conf.o scripts/kconfig/zconf.tab.o scripts/kconfig/conf --defconfig=arch/../configs/rpi_0_w_defconfig Kconfig input in flex scanner failed scripts/kconfig/Makefile:121: recipe for target 'rpi_0_w_defconfig' failed make[1]: *** [rpi_0_w_defconfig] Error 2 Makefile:478: recipe for target 'rpi_0_w_defconfig' failed make: *** [rpi_0_w_defconfig] Error 2 BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
