Hi Stefan,

> IIRC, then you problem was more related to using an 8bit wide chip (chip-
> width) on an 16bit port-width, 

Yes, it is our board flash layout.

> than being a specific Numonyx issue. Correct?
> 
But the same board with a Spansion S29GL flash is fully supported by
U-Boot, so, I think It is a Numonyx issue.

Txema.



_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to