Hi Simon, Simon Goldschmidt <[email protected]> wrote on Fri, 25 Jan 2019 21:30:49 +0100:
> This adds reset handling to the devicetree-enabled denalid nand driver. "Denali NAND driver" > > For backwards compatibility, only a warning is printed when failing to > get reset handles. > > Signed-off-by: Simon Goldschmidt <[email protected]> > --- > > drivers/mtd/nand/raw/denali_dt.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/mtd/nand/raw/denali_dt.c > b/drivers/mtd/nand/raw/denali_dt.c > index d384b974df..21c4540637 100644 > --- a/drivers/mtd/nand/raw/denali_dt.c > +++ b/drivers/mtd/nand/raw/denali_dt.c > @@ -9,6 +9,7 @@ > #include <linux/io.h> > #include <linux/ioport.h> > #include <linux/printk.h> > +#include <reset.h> > > #include "denali.h" > > @@ -64,6 +65,7 @@ static int denali_dt_probe(struct udevice *dev) > const struct denali_dt_data *data; > struct clk clk, clk_x, clk_ecc; > struct resource res; > + struct reset_ctl_bulk reset_bulk; > int ret; > > data = (void *)dev_get_driver_data(dev); > @@ -131,6 +133,12 @@ static int denali_dt_probe(struct udevice *dev) > denali->clk_x_rate = 200000000; > } > > + ret = reset_get_bulk(bus, &reset_bulk); > + if (ret) > + dev_warn(bus, "Cant' get reset: %d\n", ret); > + else > + reset_deassert_bulk(&reset_bulk); Where are reset_get_bulk/reset_deassert_bulk() defined? > + > return denali_init(denali); > } > Thanks, Miquèl _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
