On Wed, Jan 23, 2019 at 7:20 AM <tien.fong.c...@intel.com> wrote:
>
> From: Tien Fong Chee <tien.fong.c...@intel.com>
>
> Most of the time SPL only needs very simple FAT reading, so having
> CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help
> to save 64KiB default max clustersize from memory.
>
> Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
>
> ---
>
> Changes in v2:
> - Changed to CONFIG_IS_ENABLED(FAT_WRITE) to control build for FAT write
> int both SPL and U-Boot
> - Changed to CONFIG_IS_ENABLED for config FS_FAT too.
> ---
> common/spl/Kconfig | 7 +++++++
> fs/fat/Makefile | 4 ++--
> fs/fat/fat.c | 3 ++-
> fs/fs.c | 2 +-
> 4 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 93e7fe9..9042117 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -403,6 +403,13 @@ config SPL_FS_FAT
> filesystem from within SPL. Support for the underlying block
> device (e.g. MMC or USB) must be enabled separately.
>
> +config SPL_FAT_WRITE
> + bool "Support write for FAT filesystems"
> + help
> + Enable write support for FAT and VFAT filesystems with SPL.
> + Support for the underlying block device (e.g. MMC or USB) must be
> + enabled separately.
> +
> config SPL_FPGA_SUPPORT
> bool "Support FPGAs"
> help
> diff --git a/fs/fat/Makefile b/fs/fat/Makefile
> index e64b61a..f84efac 100644
> --- a/fs/fat/Makefile
> +++ b/fs/fat/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-$(CONFIG_FS_FAT) := fat.o
> -obj-$(CONFIG_FAT_WRITE):= fat_write.o
> +obj-$(CONFIG_$(SPL_)FS_FAT) = fat.o
> +obj-$(CONFIG_$(SPL_)FAT_WRITE) = fat_write.o
> diff --git a/fs/fat/fat.c b/fs/fat/fat.c
> index ac8913e..ecfa255 100644
> --- a/fs/fat/fat.c
> +++ b/fs/fat/fat.c
> @@ -145,7 +145,8 @@ static void get_name(dir_entry *dirent, char *s_name)
> }
>
> static int flush_dirty_fat_buffer(fsdata *mydata);
> -#if !defined(CONFIG_FAT_WRITE)
> +
> +#if !CONFIG_IS_ENABLED(FAT_WRITE)
> /* Stub for read only operation */
> int flush_dirty_fat_buffer(fsdata *mydata)
> {
> diff --git a/fs/fs.c b/fs/fs.c
> index cb26517..48b8e9a 100644
> --- a/fs/fs.c
> +++ b/fs/fs.c
> @@ -168,7 +168,7 @@ static struct fstype_info fstypes[] = {
> .exists = fat_exists,
> .size = fat_size,
> .read = fat_read_file,
> -#ifdef CONFIG_FAT_WRITE
> +#if CONFIG_IS_ENABLED(FAT_WRITE)
> .write = file_fat_write,
> .unlink = fat_unlink,
> .mkdir = fat_mkdir,
> --
> 2.2.0
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
