> -----Original Message----- > From: York Sun > Sent: Friday, January 18, 2019 2:43 AM > To: Rajesh Bhagat <rajesh.bha...@nxp.com>; u-boot@lists.denx.de > Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; Pankit Garg > <pankit.g...@nxp.com> > Subject: Re: [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config > > On 12/26/18 8:37 PM, Rajesh Bhagat wrote: > > Restore the legacy flow along with TFABOOT flow for IFC configuration. > > What's the reason to go back to old flow? >
Hi York, IFC configuration was made dynamic instead of static in previous patch in TF-A and non TF-A mode. Though dynamic configuration works fine for all the platforms in TF-A mode, it is broken for non TF-A mode on some of the platforms like ls1021atwr, ls1021aqds, ls1043ardb and ls1046aqds. This patch adds the static configuration back for non TF-A mode to support above platforms. Regards, Rajesh Bhagat > York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot