Hi Igor,
On Thu, Jan 17, 2019 at 04:37:40PM +0200, Igor Opaniuk wrote:
> As Poplar supports running TF-A with OP-TEE as BL32
> payload, add op-tee node in DT, which enables usage of
> OP-TEE driver (which provides an interface for requesting services
> from OP-TEE).
>
> Signed-off-by: Igor Opaniuk <igor.opan...@linaro.org>
I'm fine with the change. But rather than pushing changes to u-boot,
can you please push it to kernel repository, which is the DTS upstream
right now? We sync DTS changes from kernel when needed, and only
maintains u-boot specific changes in hi3798cv200-u-boot.dtsi.
Shawn
> ---
> arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/dts/hi3798cv200-poplar.dts
> b/arch/arm/dts/hi3798cv200-poplar.dts
> index 964326e..6bc2a23 100644
> --- a/arch/arm/dts/hi3798cv200-poplar.dts
> +++ b/arch/arm/dts/hi3798cv200-poplar.dts
> @@ -28,6 +28,13 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> --
> 2.7.4
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
