Joe,
Am 10.12.2018 um 05:08 schrieb Marek Vasut:
On 12/09/2018 09:50 PM, Simon Goldschmidt wrote:
Am 17.11.2018 um 17:02 schrieb Joe Hershberger:
On Sat, Nov 17, 2018 at 3:25 AM Simon Goldschmidt
<simon.k.r.goldschm...@gmail.com> wrote:
The designware driver has a bug in setting the tx length into the dma
descriptor: it always or's the length into the descriptor without
zeroing out the length mask before.
This results in occasional packets being transmitted with a length
greater than they should be (trailer). Due to the nature of Ethernet
allowing such a trailer, most packets seem to be parsed fine by remote
hosts, which is probably why this hasn't been noticed.
Fix this by correctly clearing the size mask before setting the new
length.
Tested on socfpga gen5.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
Marek, this and 2/2 is a assigned to you in patchwork, will you push
them or is it Joe's code as u-boot-net maintainer?
This is net , so Joe should pick it .
I've assigned this one and 2/2 to you in patchwork, is that OK? Could
you pick these after the release?
Thanks,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
