Update the flashmap so that this board can be started over USB A-A. It
is slightly different from snow.
Signed-off-by: Simon Glass <s...@chromium.org>
Reviewed-by: Lukasz Majewski <lu...@denx.de>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/exynos5250-spring.dts | 41 ++++++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/exynos5250-spring.dts
b/arch/arm/dts/exynos5250-spring.dts
index 942f502775..c7553208ad 100644
--- a/arch/arm/dts/exynos5250-spring.dts
+++ b/arch/arm/dts/exynos5250-spring.dts
@@ -40,9 +40,46 @@
reg = <0x40000000 0x80000000>;
};
+ iram {
+ reg = <0x02020000 0x60000>;
+ };
+
+ config {
+ samsung,bl1-offset = <0x1400>;
+ samsung,bl2-offset = <0x3400>;
+ u-boot-memory = "/memory";
+ u-boot-offset = <0x3e00000 0x100000>;
+ };
+
flash@0 {
- spl { /* spl size override */
- size = <0x8000>;
+ reg = <0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pre-boot {
+ label = "bl1 pre-boot";
+ reg = <0 0x2000>;
+ read-only;
+ filename = "e5250.nbl1.bin";
+ type = "blob exynos-bl1";
+ required;
+ };
+
+ spl {
+ label = "bl2 spl";
+ reg = <0x2000 0x8000>;
+ read-only;
+ filename = "bl2.bin";
+ type = "blob exynos-bl2 boot,dtb";
+ payload = "/flash/ro-boot";
+ required;
+ };
+
+ ro-boot {
+ label = "u-boot";
+ reg = <0xa000 0xb0000>;
+ read-only;
+ type = "blob boot,dtb";
+ required;
};
};
--
2.20.1.97.g81188d93c3-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
