On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters
and IDs to flash parameter array. Otherwise, the flash probe will fails.
Signed-off-by: Ye Li <ye...@nxp.com>
---
drivers/mtd/spi/spi_flash_ids.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
index ad0a0c8..17f9893 100644
--- a/drivers/mtd/spi/spi_flash_ids.c
+++ b/drivers/mtd/spi/spi_flash_ids.c
@@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = {
{"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL |
WR_QPP) },
{"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL |
WR_QPP) },
{"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL |
WR_QPP) },
+ {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL |
SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
{"s25fl008a", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
