+Bin
On Sat, 15 Dec 2018 at 17:23, Petr Štetiar <yn...@true.cz> wrote:
>
> Hi,
>
> I'm having problems with my bootscript which works on 2018.03 but is having
> problems on latest master. I need to run `mmc part` to get it working.
>
> U-Boot 2019.01-rc1-00337-g42cc2cf (Dec 16 2018 - 01:02:22 +0100)
> Model: Toradex Apalis iMX6 Quad 2GB IT V1.1A, Serial# 04875944
>
> # mmc dev 0
> switch to partitions #0, OK
> mmc0(part 0) is current device
>
> # load mmc 0:1 ${loadaddr} ${script}
> ** No partition table - mmc 0 **
>
> # mmc part
>
> Partition Map for MMC device 0 -- Partition Type: DOS
>
> Part Start Sector Num Sectors UUID Type
> 1 2048 32768 5452574f-01 83 Boot
> 2 36864 524288 5452574f-02 83a
>
> # load mmc 0:1 ${loadaddr} ${script}
> 641 bytes read in 26 ms (23.4 KiB/s)
>
> Same problem with `ext4ls`:
>
> # mmc dev 0
> switch to partitions #0, OK
> mmc0(part 0) is current device
>
> # ext4ls mmc 0:1
> ** No partition table - mmc 0 **
>
> # mmc part
>
> Partition Map for MMC device 0 -- Partition Type: DOS
>
> Part Start Sector Num Sectors UUID Type
> 1 2048 32768 5452574f-01 83 Boot
> 2 36864 524288 5452574f-02 83
>
> # ext4ls mmc 0:1
> <DIR> 4096 .
> <DIR> 4096 ..
> <DIR> 4096 lost+found
> 641 boot.scr
> 47312 imx6q-apalis-ixora.dtb
> 2521736 uImage
>
> -- ynezz
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
