On 1/2/19 10:47 AM, Lukasz Majewski wrote:
> Hi Marek,
>
>> On 1/2/19 12:37 AM, Lukasz Majewski wrote:
>>> The TPC70 can boot from eMMC's boot0. This patch allows it to update
>>> this HW partition's SPL.
>>>
>>> Signed-off-by: Lukasz Majewski <lu...@denx.de>
>>> ---
>>>
>>> include/configs/kp_imx6q_tpc.h | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git a/include/configs/kp_imx6q_tpc.h
>>> b/include/configs/kp_imx6q_tpc.h index ee9c56bc21..f26b18442b 100644
>>> --- a/include/configs/kp_imx6q_tpc.h
>>> +++ b/include/configs/kp_imx6q_tpc.h
>>> @@ -49,6 +49,7 @@
>>> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
>>> #define CONFIG_SYS_FSL_USDHC_NUM 2
>>> #define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 =
>>> SDHC4 (eMMC) */ +#define CONFIG_SUPPORT_EMMC_BOOT
>>>
>>> /* UART */
>>> #define CONFIG_MXC_UART
>>> @@ -109,6 +110,10 @@
>>> "setexpr blkc ${blkc} + 1;" \
>>> "mmc write ${loadaddr} 0x2 ${blkc};" \
>>> "fi;\0" \
>>> + "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run
>>> upd_SPL_sd\0" \
>>
>> If mmc dev 1 fails, this will randomly rewrite or even damage some
>> SD/MMC card that was selected before
>> . Use && ...
>
> Ok - good point.
>
>>
>>> + "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run
>>> upd_uboot_sd\0" \
>>
>> Deduplicate these repeated commands.
>
> Could you be more specific here?
>
> Without mmc dev 1 and partconf I cannot access boot0 eMMC area.
> This particular board has the SD as mmc0 (rescue/devel) and eMMC as
> mmc1 (and eMMC is a production boot medium).
The same commands are called from multiple scripts.
>>> + "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \
>>> + "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \
>>> "upd_wic=" \
>>> "if tftp ${loadaddr} ${wic_file}; then " \
>>> "setexpr blkc ${filesize} / 0x200;" \
>>>
>>
>>
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
