On Fri, Dec 14, 2018 at 3:48 PM Jagan Teki <ja...@amarulasolutions.com> wrote:
>
> On Wed, Dec 5, 2018 at 5:58 PM Stefan Mavrodiev <ste...@olimex.com> wrote:
> >
> > Current driver doesn't check if the destination pointer is NULL.
> > This cause the data from the FIFO to be stored inside the internal
> > SDRAM ( address 0 ).
> >
> > The patch add simple check if the destination pointer is NULL.
> >
> > Signed-off-by: Stefan Mavrodiev <ste...@olimex.com>
> > ---
> > drivers/spi/sun4i_spi.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/spi/sun4i_spi.c b/drivers/spi/sun4i_spi.c
> > index b86b5a00ad..38cc743c61 100644
> > --- a/drivers/spi/sun4i_spi.c
> > +++ b/drivers/spi/sun4i_spi.c
> > @@ -129,7 +129,8 @@ static inline void sun4i_spi_drain_fifo(struct
> > sun4i_spi_priv *priv, int len)
> >
> > while (len--) {
> > byte = readb(&priv->regs->rxdata);
> > - *priv->rx_buf++ = byte;
> > + if (priv->rx_buf)
> > + *priv->rx_buf++ = byte;
>
> Acked-by: Jagan Teki <ja...@openedev.com>
>
> But, have you tested how much data in the fifo before drained? It's
> better we can get the available data before reading via fifo_sta
Didn't find any response on this? Indeed I'm waiting for it.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
