Am 19.12.18 um 13:42 schrieb Lars Povlsen:
> As we are moving to multi-dtb and board detection, remove static board
> config options.
> 
> Signed-off-by: Lars Povlsen <lars.povl...@microchip.com>
> ---
>  arch/mips/mach-mscc/Kconfig | 38 ++++++++++---------------------------
>  1 file changed, 10 insertions(+), 28 deletions(-)
> 

This patch should be squashed into the last commit to not break
bisectability. After only applying this patch you can't build any
Ocelot/Luton baords anymore until the last patch is applied. Otherwise
the series looks good.

> diff --git a/arch/mips/mach-mscc/Kconfig b/arch/mips/mach-mscc/Kconfig
> index 0e35b77c9d..37ef432e48 100644
> --- a/arch/mips/mach-mscc/Kconfig
> +++ b/arch/mips/mach-mscc/Kconfig
> @@ -15,47 +15,29 @@ config SOC_VCOREIII
>  config SYS_SOC
>       default "mscc"
>  
> +choice
> +
> +     prompt "SOC Family Variant"
> +
>  config SOC_OCELOT
> -     bool
> +     bool "Ocelot SOC Family"
>       select SOC_VCOREIII
> +     select DESIGNWARE_SPI
>       help
>         This supports MSCC Ocelot family of SOCs.
>  
>  config SOC_LUTON
> -     bool
> +     bool "Luton SOC Family"
>       select SOC_VCOREIII
> +     select MSCC_BITBANG_SPI_GPIO
>       help
>         This supports MSCC Luton family of SOCs.
>  
> +endchoice
> +
>  config SYS_CONFIG_NAME
>       default "vcoreiii"
>  
> -choice
> -     prompt "Board select"
> -
> -config TARGET_OCELOT_PCB120
> -     bool "MSCC PCB120 Reference Board (aka VSC5635EV)"
> -     select SOC_OCELOT
> -     help
> -       When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
> -       ocelot_pcb120
> -
> -config TARGET_OCELOT_PCB123
> -     bool "MSCC PCB123 Reference Board (aka VSC7514EV))"
> -     select SOC_OCELOT
> -     help
> -       When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
> -       ocelot_pcb123
> -
> -config TARGET_LUTON_PCB091
> -     bool "MSCC PCB091 Reference Board"
> -     select SOC_LUTON
> -     select MSCC_BITBANG_SPI_GPIO
> -     help
> -       When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
> -       luton_pcb091
> -endchoice
> -
>  choice
>       prompt "DDR type"
>  
> 

-- 
- Daniel
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to