From: Enric Balletbo i Serra <eballe...@iseebcn.com>
This patch adds support for the IGEP v2 board.
The IGEP v2 board is a low-cost, fan-less and industrial temperature
range single board computer that unleashes laptop-like performance and
expandability without the bulk, expense, or noise of typical desktop
machines. Its architecture shares much in common with other OMAP3 boards.
Signed-off-by: Enric Balletbo i Serra <eballe...@iseebcn.com>
---
MAINTAINERS | 4 +
Makefile | 3 +
board/isee/igep0020/Makefile | 49 +++++
board/isee/igep0020/config.mk | 34 ++++
board/isee/igep0020/igep0020.c | 134 +++++++++++++
board/isee/igep0020/igep0020.h | 399 ++++++++++++++++++++++++++++++++++++++
include/configs/omap3_igep0020.h | 245 +++++++++++++++++++++++
7 files changed, 868 insertions(+), 0 deletions(-)
create mode 100644 board/isee/igep0020/Makefile
create mode 100644 board/isee/igep0020/config.mk
create mode 100644 board/isee/igep0020/igep0020.c
create mode 100644 board/isee/igep0020/igep0020.h
create mode 100644 include/configs/omap3_igep0020.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 94839ce..19da604 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -525,6 +525,10 @@ Stefano Babic <sba...@denx.de>
polaris xscale
trizepsiv xscale
+Enric Balletbo i Serra <eballe...@gmail.com>
+
+ omap3_igep0020 ARM CORTEX-A8 (OMAP3530 SoC)
+
Dirk Behme <dirk.be...@gmail.com>
omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC)
diff --git a/Makefile b/Makefile
index 412e359..90f8c29 100644
--- a/Makefile
+++ b/Makefile
@@ -3161,6 +3161,9 @@ omap3_overo_config : unconfig
omap3_evm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
+omap3_igep0020_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 igep0020 isee omap3
+
omap3_pandora_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
diff --git a/board/isee/igep0020/Makefile b/board/isee/igep0020/Makefile
new file mode 100644
index 0000000..2f11879
--- /dev/null
+++ b/board/isee/igep0020/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := igep0020.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/isee/igep0020/config.mk b/board/isee/igep0020/config.mk
new file mode 100644
index 0000000..a05f782
--- /dev/null
+++ b/board/isee/igep0020/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009
+# Integration Software and Electronics Engineering, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x8ff00000
+
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
new file mode 100644
index 0000000..a9d9deb
--- /dev/null
+++ b/board/isee/igep0020/igep0020.c
@@ -0,0 +1,134 @@
+/*
+ * Maintainer: Integration Software and Electronics Engineering,
<www.iseebcn.com>
+ *
+ * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
+ * Richard Woodruff <r-woodru...@ti.com>
+ * Syed Mohammed Khasim <kha...@ti.com>
+ * Sunil Kumar <sunilsain...@gmail.com>
+ * Shashi Ranjan <shashiranjanmc...@gmail.com>
+ *
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+#include "igep0020.h"
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#if defined(CONFIG_CMD_NET)
+ setup_net_chip();
+#endif
+
+ dieid_num_r();
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_IGEP0020();
+}
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to the
+ * Ethernet hardware.
+ */
+static void setup_net_chip(void)
+{
+ struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ /* Configure GPMC registers */
+ writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
+ writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
+ writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
+ writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
+ writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
+ writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
+ writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+
+ /* Make GPIO 64 as output pin */
+ writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
+
+ /* Now send a pulse on the GPIO pin */
+ writel(GPIO0, &gpio3_base->setdataout);
+ udelay(1);
+ writel(GPIO0, &gpio3_base->cleardataout);
+ udelay(1);
+ writel(GPIO0, &gpio3_base->setdataout);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
+
diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
new file mode 100644
index 0000000..e5e0ac9
--- /dev/null
+++ b/board/isee/igep0020/igep0020.h
@@ -0,0 +1,399 @@
+/*
+ * (C) Copyright 2009
+ * Integration Software and Electronics Engineering, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _IGEP0020_H_
+#define _IGEP0020_H_
+
+const omap3_sysinfo sysinfo = {
+ DDR_STACKED,
+ "IGEP v2 board",
+ "ONENAND",
+};
+
+static void setup_net_chip(void);
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_IGEP0020() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3*/\
+ /* GPMC - General-Purpose Memory Controller */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /* GPMC_A1 */\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /* GPMC_A2 */\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /* GPMC_A3 */\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /* GPMC_A4 */\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /* GPMC_A5 */\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /* GPMC_A6 */\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /* GPMC_A7 */\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /* GPMC_A8 */\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /* GPMC_A9 */\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /* GPMC_A10 */\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /* GPMC_D0 */\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /* GPMC_D1 */\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /* GPMC_D2 */\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /* GPMC_D3 */\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /* GPMC_D4 */\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /* GPMC_D5 */\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /* GPMC_D6 */\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /* GPMC_D7 */\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /* GPMC_D8 */\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /* GPMC_D9 */\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /* GPMC_D10 */\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /* GPMC_D11 */\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /* GPMC_D12 */\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /* GPMC_D13 */\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /* GPMC_D14 */\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /* GPMC_D15 */\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0
*/\
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1
*/\
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPMC_nCS2
*/\
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPMC_nCS3
*/\
+ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4
*/\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5
*/\
+ MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6
*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
+ \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /* GPIO_64 -ETH_NRESET
*/\
+ \
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*
SYS_nDMA_REQ3 */\
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1
*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /* GPMC_WAIT1 */\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /* GPMC_WAIT3 */\
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /* DSS_PCLK */\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /* DSS_HSYNC
*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /* DSS_VSYNC
*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /* DSS_ACBIAS */\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /* DSS_DATA0
*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /* DSS_DATA1
*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /* DSS_DATA2
*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /* DSS_DATA3
*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /* DSS_DATA4
*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /* DSS_DATA5
*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /* DSS_DATA6
*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /* DSS_DATA7
*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /* DSS_DATA8
*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /* DSS_DATA9
*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /* DSS_DATA10 */\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /* DSS_DATA11 */\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /* DSS_DATA12 */\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /* DSS_DATA13 */\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /* DSS_DATA14 */\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /* DSS_DATA15 */\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /* DSS_DATA16 */\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /* DSS_DATA17 */\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /* DSS_DATA18 */\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /* DSS_DATA19 */\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /* DSS_DATA20 */\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /* DSS_DATA21 */\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /* DSS_DATA22 */\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /* DSS_DATA23 */\
+ /* Audio Interface */\
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /* McBSP2_FSX */\
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /* McBSP2_CLKX */\
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /* McBSP2_DR
*/\
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /* McBSP2_DX
*/\
+ /* Expansion card 1 */\
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0
*/\
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1
*/\
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2
*/\
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3
*/\
+ \
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /* MMC1_DAT4
*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /* MMC1_DAT5
*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /* MMC1_DAT6
*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /* MMC1_DAT7
*/\
+ /* SDIO Interface to WIFI Module (EXPANSION CONNECTOR) */\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /* MMC2_CLK */\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /* MMC2_CMD */\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /* MMC2_DAT0
*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /* MMC2_DAT1
*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /* MMC2_DAT2
*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /* MMC2_DAT3
*/\
+ \
+ /* GSPI Interface to WIFI Module */ \
+/* MUX_VAL(CP(MMC2_CLK), (IEN | PTD | DIS | M1)) McSPI3_CLK */\
+/* MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M1)) McSPI3_SIMO */\
+/* MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M1)) McSPI3_SOMI */\
+/* MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M4)) GPIO_133 */\
+/* MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M4)) GPIO_134 */\
+/* MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M4)) GPIO_135
(GPIO-Based CS) */\
+ \
+ MUX_VAL(CP(CAM_HS), (IDIS | PTD | DIS | M4)) /* GPIO_94 - PDN (Rev.
B) */\
+ MUX_VAL(CP(CAM_VS), (IDIS | PTD | DIS | M4)) /* GPIO_95 - RESET_N_W
(Rev. B) */\
+ \
+ MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M4)) /* GPIO_136 */\
+ MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M4)) /* GPIO_137 -
RESET_N_B */\
+ MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M4)) /* GPIO_138 -
PDN (Rev. C) */\
+ MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | DIS | M4)) /* GPIO_139 -
RESET_N_W (Rev. C) */\
+ /* Bluetooth (EXPANSION CONNECTOR) */\
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) /* McBSP3_DX
*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) /* McBSP3_DR
*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)) /* McBSP3_CLKX */\
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) /* McBSP3_FSX */\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /* UART2_CTS
*/\
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /* UART2_RTS
*/\
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /* UART2_TX */\
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) /* UART2_RX */\
+ /* 485 Interface */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /* UART1_RTS
*/\
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /* UART1_CTS
*/\
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /* GPIO_152 */\
+ /* Serial Interface */\
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /* UART3_CTS_RCTX*/\
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /* UART3_RTS_SD */\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX_IRTX*/\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /* HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /* HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /* HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /* HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /* HSUSB0_DATA7*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /* GPIO_168*/\
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /* GPIO_183*/\
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /* I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /* I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /* GPIO_170*/\
+ /* SPI1 ADC121S101 */ \
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /* McSPI1_CLK */\
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /* McSPI1_SIMO */\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /* McSPI1_SOMI */\
+ MUX_VAL(CP(MCSPI1_CS3), (IDIS | PTD | DIS | M0)) /* McSPI1_CS3 */\
+ \
+ MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTD | DIS | M0)) /* McSPI1_CS0 */\
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | DIS | M4)) /* GPIO_175 */\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | DIS | M4)) /* GPIO_176 */\
+ /* SPI2 (25GHz RF PORT) */ \
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /* McSPI2_CLK */\
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /* McSPI2_SIMO */\
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /* McSPI2_SOMI */\
+ MUX_VAL(CP(MCSPI2_CS0), (IDIS | PTD | DIS | M0)) /* McSPI2_CS0 */\
+ \
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M4)) /* GPIO_182 */\
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /* SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /* SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 -
MMC1_WP*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8*/ \
+ /* VIO_1V8 */\
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /* SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /* SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /* GPIO_186*/\
+ /* USB EHCI (port 1) */ \
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)) /* HSUSB1_STP */\
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /* HSUSB1_CLK */\
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA0 */\
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA1 */\
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA2 */\
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA3 */\
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA4 */\
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA5 */\
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA6 */\
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DATA7 */\
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_DIR */\
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /* HSUSB1_NXT */\
+ /* Generic IO (outputs) */\
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M4)) /* GPIO_24 -
USB1HS_nRST */\
+ MUX_VAL(CP(ETK_D12_ES2), (IDIS | PTU | DIS | M4)) /* GPIO_26 - LED1
*/\
+ MUX_VAL(CP(ETK_D13_ES2), (IDIS | PTU | DIS | M4)) /* GPIO_27 - LED0
*/\
+ MUX_VAL(CP(CAM_D6), (IDIS | PTU | DIS | M4)) /* GPIO_105 - RF_CTRL
*/\
+ MUX_VAL(CP(CAM_D7), (IDIS | PTU | DIS | M4)) /* GPIO_106 -
RF_STANDBY */\
+ MUX_VAL(CP(CAM_D8), (IDIS | PTU | DIS | M4)) /* GPIO_107 - RF_INT
*/\
+ MUX_VAL(CP(CAM_D9), (IDIS | PTU | DIS | M4)) /* GPIO_108 - RF_SYNCB
*/\
+ /* Generic IO (inputs) */\
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M4)) /* GPIO_25 */\
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) /* GPIO_28 */\
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) /* GPIO_29 */\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M4)) /* GPIO_99 */\
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M4)) /* GPIO_100 */\
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M4)) /* GPIO_112 */\
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M4)) /* GPIO_113 */\
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M4)) /* GPIO_114 */\
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M4)) /* GPIO_115 */\
+ \
+ \
+ /* LCD_INI */\
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /* GPIO_153
*/\
+ /* LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /* GPIO_154 */\
+ /* LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /* GPIO_155 */\
+ /* LCD_RESB */\
+ MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /* GPIO_156 */\
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /* GPIO_157 */\
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /* GPIO_158 */\
+ MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /* GPIO_159 */\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /* McBSP_CLKS */\
+ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /* GPIO_161 */\
+ MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /* GPIO_162 */\
+ \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /* CAM_XCLKA
*/\
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /* CAM_PCLK */\
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /* GPIO_98 */\
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /* CAM_D2 */\
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /* CAM_D3 */\
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /* CAM_D4 */\
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /* CAM_D5 */\
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /* CAM_D10 */\
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /* CAM_D11 */\
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /* CAM_XCLKB
*/\
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /* GPIO_167 */\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /* CAM_STROBE*/\
+ \
+ MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+#endif
diff --git a/include/configs/omap3_igep0020.h b/include/configs/omap3_igep0020.h
new file mode 100644
index 0000000..0b2564a
--- /dev/null
+++ b/include/configs/omap3_igep0020.h
@@ -0,0 +1,245 @@
+/*
+ * Configuration settings for the IGEP v2 board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_OMAP3430 1 /* which is in a 3430 */
+#define CONFIG_OMAP3_IGEP0020 1 /* working with IGEP0020 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+
+/*
+ * NS16550 Configuration
+ */
+
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/* select serial console configuration */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,115200}
+#define CONFIG_MMC 1
+#define CONFIG_OMAP3_MMC 1
+#define CONFIG_DOS_PARTITION 1
+
+/* DDR - Use Numonyx DDR */
+#define CONFIG_OMAP3_NUMONYX_DDR 1
+
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "IGEP v2"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_ONENAND /* ONENAND support */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS /* NFS support */
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS /* List all found images */
+#undef CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#undef CONFIG_CMD_NAND /* NAND support */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_BUS 0
+#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_DRIVER_OMAP34XX_I2C 1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_EXTRA_ENV_SETTINGS "\0"
+#define CONFIG_BOOTCOMMAND "mmc init 0 ; fatload mmc 0 0x80000000
setup.ini ; source \0"
+
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "U-Boot # "
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT V_PROMPT
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
+ /* works on */
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
+ 0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
+ /* load address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */
+#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C 1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */
+
+#define CONFIG_SYS_FLASH_BASE boot_flash_base
+
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_ONENAND 1
+
+#define CONFIG_ENV_SIZE (512 << 10) /* 512 KiB */
+
+#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+#define CONFIG_ENV_OFFSET boot_flash_off
+#define ONENAND_ENV_OFFSET 0x200000 /* environment starts here */
+
+#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
+ /* initial data */
+
+/*
+ * SMSC911x Ethernet
+ */
+#if defined(CONFIG_CMD_NET)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE 0x2C000000
+
+
+#endif /* (CONFIG_CMD_NET) */
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif /* __CONFIG_H */
+
--
1.5.4.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
