On 12/13/2018 03:03 PM, Jean-Jacques Hiblot wrote:
>
> On 05/12/2018 13:57, Marek Vasut wrote:
>> On 12/05/2018 01:49 PM, Stefan Mavrodiev wrote:
>>> When the device is in peripheral mode
>> Can you have two devices, one in peripheral mode and one in host mode,
>> on the same system ?
>
> It is possible with the musb-new. Using DM_USB and DM_USB_GADGET, I did
> it with on a beaglebone black.
Does this patch break it ? And if so, can you send a proper fix ?
> JJ
>
>>> there is no
>>> struct usb_bus_priv allocated pointer, as the uclass driver
>>> ("usb_dev_generic") doesn't call per_device_auto_alloc_size.
>>>
>>> This results in writing to the internal SDRAM at
>>> priv->desc_before_addr = true;
>>>
>>> Signed-off-by: Stefan Mavrodiev <ste...@olimex.com>
>>> ---
>>> drivers/usb/musb-new/sunxi.c | 8 ++++++--
>>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
>>> index 6cf9826cda..f3deb9bc66 100644
>>> --- a/drivers/usb/musb-new/sunxi.c
>>> +++ b/drivers/usb/musb-new/sunxi.c
>>> @@ -435,11 +435,14 @@ static int musb_usb_probe(struct udevice *dev)
>>> {
>>> struct sunxi_glue *glue = dev_get_priv(dev);
>>> struct musb_host_data *host = &glue->mdata;
>>> - struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
>>> struct musb_hdrc_platform_data pdata;
>>> void *base = dev_read_addr_ptr(dev);
>>> int ret;
>>> +#ifdef CONFIG_USB_MUSB_HOST
>>> + struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
>>> +#endif
>>> +
>>> if (!base)
>>> return -EINVAL;
>>> @@ -459,7 +462,6 @@ static int musb_usb_probe(struct udevice *dev)
>>> return ret;
>>> }
>>> - priv->desc_before_addr = true;
>> See my question at the beginning, and if that can be the case, the fix
>> is to check if priv is not null here, eg.
>> if (priv)
>> priv->...
>>
>> Still, why is the priv data not allocated for device ?
>>
>>> memset(&pdata, 0, sizeof(pdata));
>>> pdata.power = 250;
>>> @@ -467,6 +469,8 @@ static int musb_usb_probe(struct udevice *dev)
>>> pdata.config = glue->cfg->config;
>>> #ifdef CONFIG_USB_MUSB_HOST
>>> + priv->desc_before_addr = true;
>>> +
>>> pdata.mode = MUSB_HOST;
>>> host->host = musb_init_controller(&pdata, &glue->dev, base);
>>> if (!host->host)
>>>
>>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
