On 12/12/18 3:02 PM, Dominik Adamski wrote:
> Hello,
> I think that I have found a bug in U-Boot UEFI implementation for
> BeagleBone Black board.
>
> I have tested U-Boot UEFI implementation for BeagleBone Black. I am able
> to load Linux successfully via GRUB bootloader with U-Boot v2018.09-rc2
> . U-Boot v2018.09-rc3 and above versions cause that the platform
> restarts over and over again. It starts booting, then it loads GRUB and
> when GRUB finishes its work an error occurs and the board restarts.
>
> I have looked through U-Boot repository and I have found the commit,
> which breaks booting. It's name is as follows: "efi_loader: update
> runtime services table crc32" (commit ID:
> a39f39cdd8be5cd3e7a8b696a463b621e3d827e0 ) . I have figured out, that
> when I comment out function call:
> efi_update_table_header_crc32(&efi_runtime_services.hdr); in function
> efi_runtime_detach then I am able to launch Linux successfully.
>
> My setup of U-Boot, GRUB and Linux was as follows:
> https://github.com/DominikAdamski/Beaglebone_GRUB_Manual . For U-Boot
> v2018.09 I get following log when booting:
>
> U-Boot 2018.09 (Dec 11 2018 - 11:11:16 +0100)
>
> CPU : AM335X-GP rev 2.1
> Model: TI AM335x BeagleBone Black
> DRAM: 512 MiB
> NAND: 0 MiB
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Loading Environment from FAT... *** Warning - bad CRC, using default
> environment
>
> No USB device found
> <ethaddr> not set. Validating first E-fuse MAC
> Net: eth0: ethernet@4a100000
> Hit any key to stop autoboot: 2 ^H^H^H 1 ^H^H^H 0
> switch to partitions #0, OK
> mmc0 is current device
> SD/MMC found on device 0
> ** Unable to read file boot.scr **
> 85 bytes read in 1 ms (83 KiB/s)
> Loaded env from uEnv.txt
> Importing environment from mmc0 ...
> Running uenvcmd ...
> 403968 bytes read in 28 ms (13.8 MiB/s)
> ^[[18tScanning disks on usb...
> Disk usb0 not ready
> Disk usb1 not ready
> Disk usb2 not ready
> Disk usb3 not ready
> Scanning disks on mmc...
> MMC Device 2 not found
> MMC Device 3 not found
> Found 4 disks
> WARNING: booting without device tree
> ## Starting EFI application at 82000000 ...
> ^[[?25h^[[0;30;47mWelcome to GRUB!
> ^M
> ^M^[[0;37;40m^[[0;37;40m^[[0;37;40mEFI stub: Booting Linux Kernel...^M
> EFI stub: Using DTB from configuration table^M
> EFI stub: Exiting boot services and installing virtual address map...^M
> U-Boot EFI: Relocation at 9ff4a8a8 is out of range (2008214f)
> data abort
> pc : [<9ff4a7cc>] lr : [<9ff4a8b9>]
> reloc pc : [<808007cc>] lr : [<808008b9>]
> sp : 9df1ebac ip : 00000020 fp : 00000000
> r10: 00001000 r9 : 9df29eb8 r8 : 00000028
> r7 : 9ff4aa10 r6 : 9ff4aec4 r5 : 00000003 r4 : 9ff4aa70
> r3 : 2002aac0 r2 : 00000050 r1 : 9ff4aa70 r0 : ffffffff
> Flags: NzCv IRQs off FIQs on Mode SVC_32
> Code: 61204621 f876f000 bd106120 b5f04b36 (b31c681c)
> UEFI image [0x9ceb1000:0x9cf139ff] '/\grub.efi'
> UEFI image [0x94728000:0x9510bfff]
> Resetting CPU ...
>
> resetting ...
>
> Please let me know, if I should add more detailed logs.
>
> Dominik Adamski
>
>
Hello Dominik,
you refer to an outdated release candidate v2018.09-rc2.
The following patch is missing in the release candidate:
commit 483dbab9f9318149e5ea97daacbfae320f53e35a
Author: Heinrich Schuchardt <xypron.g...@gmx.de>
Date: Sun Jul 29 09:49:03 2018 +0200
lib: crc32: mark function crc32() as __efi_runtime
It is contained in the v2018.09 release. Please, update your page
https://github.com/DominikAdamski/Beaglebone_GRUB_Manual accordingly.
The latest release is v2018.11. Release v2018.11 will require a recent
GRUB (later than patch d0c070179d4d). Or apply the following patch
http://git.denx.de/?p=u-boot.git;a=commit;h=f31239acff61f7def88a06eef1f091fce74ecd61
Revert "efi_loader: remove efi_exit_caches()"
Best regards
Heinrich
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
