Add a short documentation for A/B enablement and 'ab_select' command usage.
Signed-off-by: Ruslan Trofymenko <ruslan.trofyme...@linaro.org> Reviewed-by: Alistair Strachan <astrac...@google.com> Reviewed-by: Sam Protsenko <semen.protse...@linaro.org> --- Changes in v2: * Сhanges related to command renaming (android_ab_select -> ab_select) doc/README.android-ab | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 doc/README.android-ab diff --git a/doc/README.android-ab b/doc/README.android-ab new file mode 100644 index 0000000..9f37ed5 --- /dev/null +++ b/doc/README.android-ab @@ -0,0 +1,67 @@ +Android A/B updates +=================== + +Overview +-------- + +A/B system updates ensures modern approach for system update. This feature +allows one to use two sets (or more) of partitions referred to as slots +(normally slot A and slot B). The system runs from the current slot while the +partitions in the unused slot can be updated [1]. + +A/B enablement +-------------- + +The A/B updates support can be activated by specifying next options in +your board configuration file: + + CONFIG_ANDROID_AB=y + CONFIG_CMD_AB_SELECT=y + +The disk space on target device must be partitioned in a way so that each +partition which needs to be updated has two or more instances. The name of +each instance must be formed by adding suffixes: _a, _b, _c, etc. +For example: boot_a, boot_b, system_a, system_b, vendor_a, vendor_b. + +As a result you can use 'ab_select' command to ensure A/B boot process in your +boot script. This command analyzes and processes A/B metadata stored on a +special partition (e.g. "misc") and determines which slot should be used for +booting up. + +Command usage +------------- + + ab_select <slot_var_name> <interface> <dev[:part_number|#part_name]> + +for example: + + => ab_select slot_name mmc 1:4 + +or + + => ab_select slot_name mmc 1#misc + +Result: + + => printenv slot_name + slot_name=a + +Based on this slot information, the current boot partition should be defined, +and next kernel command line parameters should be generated: + + - androidboot.slot_suffix= + - root= + +For example: + + androidboot.slot_suffix=_a root=/dev/mmcblk1p12 + +A/B metadata is organized according to AOSP reference [2]. On the first system +start with A/B enabled, when 'misc' partition doesn't contain required data, +the default A/B metadata will be created and written to 'misc' partition. + +References +---------- + +[1] https://source.android.com/devices/tech/ota/ab +[2] bootable/recovery/bootloader_message/include/bootloader_message/bootloader_message.h -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
