On 12/12/2018 14:55, Adam Ford wrote:
On Tue, Dec 11, 2018 at 3:51 AM Jean-Jacques Hiblot <[email protected]> wrote:
On 11/12/2018 10:47, Jean-Jacques Hiblot wrote:
On 10/12/2018 20:01, Marek Vasut wrote:
On 12/10/2018 05:35 PM, Adam Ford wrote:
There don't appear to be any boards enabling CONFIG_USB_DA8XX,
and there is a newer version of the MUSB driver, so let's remove
the legacy version of it.
Signed-off-by: Adam Ford <[email protected]>
CCing Jean, I'd like his A-B/R-B.
Looks good to me, so I'll pick it once I have it, thanks!
This is good to see some code removal
This could even go a bit further and remove:
- drivers/usb/host/ohci-da8xx.c
- arch/arm/mach-davinci/include/mach/da8xx-usb.h
I want to investigate these a bit. I might have a use for these two
files on the da850evm yet. I know the musb was replaced by musb-new,
so my hope is to make the legacy musb drivers go away first. In my
ideal word, I'd like to keep the da850-evm around for a bit longer, at
least until Logic PD discontinues the L138 and AM1808 system on
module. If I can reuse these drivers to bring back USB host
functionality, I'd like to keep them.
It's fine by me. I just thought that those files might have been overlooked.
JJ
adam
Thanks
Reviewed-by: Jean-Jacques Hiblot <[email protected]>
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 7e6be03f4a..2508b6ed0d 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -15,10 +15,6 @@ config USB_OMAP3
bool "Legacy MUSB OMAP3 / OMAP4"
depends on ARCH_OMAP2PLUS
-config USB_DA8XX
- bool "Legacy MUSB DA8xx/OMAP-L1x"
- depends on ARCH_DAVINCI
-
config USB_AM35X
bool"Legacy MUSB AM35x"
depends on ARCH_OMAP2PLUS && !USB_OMAP3
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 1242ce1c8c..744f2cfaa2 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -6,5 +6,4 @@
obj-$(CONFIG_USB_MUSB_HCD) += musb_hcd.o musb_core.o
obj-$(CONFIG_USB_MUSB_UDC) += musb_udc.o musb_core.o
obj-$(CONFIG_USB_OMAP3) += omap3.o
-obj-$(CONFIG_USB_DA8XX) += da8xx.o
obj-$(CONFIG_USB_AM35X) += am35x.o
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
deleted file mode 100644
index a652a7c3c1..0000000000
--- a/drivers/usb/musb/da8xx.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * da8xx.c - TI's DA8xx platform specific usb wrapper functions.
- *
- * Author: Ajay Kumar Gupta <[email protected]>
- *
- * Based on drivers/usb/musb/davinci.c
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <common.h>
-
-#include "musb_core.h"
-#include <asm/arch/da8xx-usb.h>
-
-/* MUSB platform configuration */
-struct musb_config musb_cfg = {
- .regs = (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
- .timeout = DA8XX_USB_OTG_TIMEOUT,
- .musb_speed = 0,
-};
-
-/*
- * This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
- */
-static void enable_vbus(void)
-{
- u32 value;
-
- /* configure GPIO bank4 pin 15 in output direction */
- value = readl(&davinci_gpio_bank45->dir);
- writel((value & (~DA8XX_USB_VBUS_GPIO)),
&davinci_gpio_bank45->dir);
-
- /* set GPIO bank4 pin 15 high to drive VBUS */
- value = readl(&davinci_gpio_bank45->set_data);
- writel((value | DA8XX_USB_VBUS_GPIO),
&davinci_gpio_bank45->set_data);
-}
-
-/*
- * Enable the usb0 phy. This initialization procedure is explained in
- * the DA8xx USB user guide document.
- */
-static u8 phy_on(void)
-{
- u32 timeout;
- u32 cfgchip2;
-
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-
- cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN |
CFGCHIP2_OTGPWRDN |
- CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
- cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN |
CFGCHIP2_PHY_PLLON |
- CFGCHIP2_REFFREQ_24MHZ;
-
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-
- /* wait until the usb phy pll locks */
- timeout = musb_cfg.timeout;
- while (timeout--)
- if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
- return 1;
-
- /* USB phy was not turned on */
- return 0;
-}
-
-/*
- * Disable the usb phy
- */
-static void phy_off(void)
-{
- u32 cfgchip2;
-
- /*
- * Power down the on-chip PHY.
- */
- cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
- cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
- cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
- writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-}
-
-/*
- * This function performs DA8xx platform specific initialization
for usb0.
- */
-int musb_platform_init(void)
-{
- u32 revision;
-
- /* enable psc for usb2.0 */
- lpsc_on(33);
-
- /* enable usb vbus */
- enable_vbus();
-
- /* reset the controller */
- writel(0x1, &da8xx_usb_regs->control);
- udelay(5000);
-
- /* start the on-chip usb phy and its pll */
- if (phy_on() == 0)
- return -1;
-
- /* Returns zero if e.g. not clocked */
- revision = readl(&da8xx_usb_regs->revision);
- if (revision == 0)
- return -1;
-
- /* Disable all interrupts */
- writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
- DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
- return 0;
-}
-
-/*
- * This function performs DA8xx platform specific deinitialization
for usb0.
- */
-void musb_platform_deinit(void)
-{
- /* Turn of the phy */
- phy_off();
-
- /* flush any interrupts */
- writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
- DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
- writel(0, &da8xx_usb_regs->eoi);
-}
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
