All users of sound are converted to use driver model. Drop the old code
and the CONFIG_DM_SOUND option.
Signed-off-by: Simon Glass <s...@chromium.org>
---
cmd/sound.c | 12 ---
drivers/sound/Kconfig | 6 --
drivers/sound/Makefile | 10 +-
drivers/sound/max98095.c | 88 ----------------
drivers/sound/sandbox.c | 11 --
drivers/sound/sound-i2s.c | 206 --------------------------------------
drivers/sound/wm8994.c | 95 ------------------
include/sound.h | 11 --
test/dm/Makefile | 6 +-
9 files changed, 6 insertions(+), 439 deletions(-)
delete mode 100644 drivers/sound/sound-i2s.c
diff --git a/cmd/sound.c b/cmd/sound.c
index b063863bc9a..d00a7738167 100644
--- a/cmd/sound.c
+++ b/cmd/sound.c
@@ -15,18 +15,12 @@ DECLARE_GLOBAL_DATA_PTR;
/* Initilaise sound subsystem */
static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
-#ifdef CONFIG_DM_SOUND
struct udevice *dev;
-#endif
int ret;
-#ifdef CONFIG_DM_SOUND
ret = uclass_first_device_err(UCLASS_SOUND, &dev);
if (!ret)
ret = sound_setup(dev);
-#else
- ret = sound_init(gd->fdt_blob);
-#endif
if (ret) {
printf("Initialise Audio driver failed\n");
return CMD_RET_FAILURE;
@@ -38,9 +32,7 @@ static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char
*const argv[])
/* play sound from buffer */
static int do_play(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
-#ifdef CONFIG_DM_SOUND
struct udevice *dev;
-#endif
int ret = 0;
int msec = 1000;
int freq = 400;
@@ -50,13 +42,9 @@ static int do_play(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
if (argc > 2)
freq = simple_strtoul(argv[2], NULL, 10);
-#ifdef CONFIG_DM_SOUND
ret = uclass_first_device_err(UCLASS_SOUND, &dev);
if (!ret)
ret = sound_beep(dev, msec, freq);
-#else
- ret = sound_play(msec, freq);
-#endif
if (ret) {
printf("Sound device failed to play (err=%d)\n", ret);
return CMD_RET_FAILURE;
diff --git a/drivers/sound/Kconfig b/drivers/sound/Kconfig
index 93f6c36af32..5de86c05c60 100644
--- a/drivers/sound/Kconfig
+++ b/drivers/sound/Kconfig
@@ -12,12 +12,6 @@ config SOUND
audio codecs are called from the sound-i2s code. This could be
converted to driver model.
-config DM_SOUND
- bool "Use driver model for sound"
- help
- Enable this option to use driver model for sound devices. This is a
- migration option and will be removed.
-
config I2S
bool "Enable I2S support"
depends on SOUND
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 75fa31ec534..df46a48568b 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -4,15 +4,11 @@
# R. Chandrasekar <rcse...@samsung.com>
obj-$(CONFIG_SOUND) += sound.o
-obj-$(CONFIG_DM_SOUND) += codec-uclass.o
-obj-$(CONFIG_DM_SOUND) += i2s-uclass.o
-obj-$(CONFIG_DM_SOUND) += sound-uclass.o
+obj-$(CONFIG_SOUND) += codec-uclass.o
+obj-$(CONFIG_SOUND) += i2s-uclass.o
+obj-$(CONFIG_SOUND) += sound-uclass.o
obj-$(CONFIG_I2S_SAMSUNG) += samsung-i2s.o
obj-$(CONFIG_SOUND_SANDBOX) += sandbox.o
-ifdef CONFIG_DM_SOUND
obj-$(CONFIG_I2S_SAMSUNG) += samsung_sound.o
-else
-obj-$(CONFIG_I2S) += sound-i2s.o
-endif
obj-$(CONFIG_SOUND_WM8994) += wm8994.o
obj-$(CONFIG_SOUND_MAX98095) += max98095.o
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
index d6710dfaa7a..fa204bf7a96 100644
--- a/drivers/sound/max98095.c
+++ b/drivers/sound/max98095.c
@@ -29,7 +29,6 @@ struct max98095_priv {
unsigned int sysclk;
unsigned int rate;
unsigned int fmt;
- int i2c_addr;
struct udevice *dev;
};
@@ -51,12 +50,7 @@ static int max98095_i2c_write(struct max98095_priv *priv,
unsigned int reg,
{
debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n",
__func__, reg, data);
-#ifdef CONFIG_DM_SOUND
- debug("dev = %s\n", priv->dev->name);
return dm_i2c_write(priv->dev, reg, &data, 1);
-#else
- return i2c_write(priv->i2c_addr, reg, 1, &data, 1);
-#endif
}
/*
@@ -73,11 +67,7 @@ static unsigned int max98095_i2c_read(struct max98095_priv
*priv,
{
int ret;
-#ifdef CONFIG_DM_SOUND
return dm_i2c_read(priv->dev, reg, data, 1);
-#else
- ret = i2c_read(priv->i2c_addr, reg, 1, data, 1);
-#endif
if (ret != 0) {
debug("%s: Error while reading register %#04x\n",
__func__, reg);
@@ -519,84 +509,6 @@ static int max98095_do_init(struct max98095_priv *priv,
return ret;
}
-#ifndef CONFIG_DM_SOUND
-static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
- const void *blob)
-{
- int error = 0;
- enum fdt_compat_id compat;
- int node;
- int parent;
-
- /* Get the node from FDT for codec */
- node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for codec in device tree\n");
- debug("node = %d\n", node);
- return -1;
- }
-
- parent = fdt_parent_offset(blob, node);
- if (parent < 0) {
- debug("%s: Cannot find node parent\n", __func__);
- return -1;
- }
-
- compat = fdtdec_lookup(blob, parent);
- switch (compat) {
- case COMPAT_SAMSUNG_S3C2440_I2C:
- pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
- error |= pcodec_info->i2c_bus;
- debug("i2c bus = %d\n", pcodec_info->i2c_bus);
- pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
- "reg", 0);
- error |= pcodec_info->i2c_dev_addr;
- debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
- break;
- default:
- debug("%s: Unknown compat id %d\n", __func__, compat);
- return -1;
- }
- if (error == -1) {
- debug("fail to get max98095 codec node properties\n");
- return -1;
- }
-
- return 0;
-}
-
-/* max98095 Device Initialisation */
-int max98095_init(const void *blob, enum en_max_audio_interface aif_id,
- int sampling_rate, int mclk_freq,
- int bits_per_sample)
-{
- int ret;
- int old_bus = i2c_get_bus_num();
- struct sound_codec_info pcodec_info;
- struct max98095_priv max98095_info;
-
- if (get_max98095_codec_values(&pcodec_info, blob) < 0) {
- debug("FDT Codec values failed\n");
- return -1;
- }
-
- i2c_set_bus_num(pcodec_info.i2c_bus);
-
- max98095_info.i2c_addr = pcodec_info.i2c_dev_addr;
- ret = max98095_device_init(&max98095_info);
- if (ret < 0) {
- debug("%s: max98095 codec chip init failed\n", __func__);
- return ret;
- }
-
- ret = max98095_do_init(&max98095_info, aif_id, sampling_rate, mclk_freq,
- bits_per_sample);
- i2c_set_bus_num(old_bus);
-
- return ret;
-}
-#endif
-
static int max98095_set_params(struct udevice *dev, int interface, int rate,
int mclk_freq, int bits_per_sample,
uint channels)
diff --git a/drivers/sound/sandbox.c b/drivers/sound/sandbox.c
index d8a971ca060..17cba616b56 100644
--- a/drivers/sound/sandbox.c
+++ b/drivers/sound/sandbox.c
@@ -28,17 +28,6 @@ struct sandbox_sound_priv {
int sum; /* Use to sum the provided audio data */
};
-#ifndef CONFIG_DM_SOUND
-int sound_play(uint32_t msec, uint32_t frequency)
-{
- sandbox_sdl_sound_start(frequency);
- mdelay(msec);
- sandbox_sdl_sound_stop();
-
- return 0;
-}
-#endif /* CONFIG_DM_SOUND */
-
int sound_init(const void *blob)
{
return sandbox_sdl_sound_init();
diff --git a/drivers/sound/sound-i2s.c b/drivers/sound/sound-i2s.c
deleted file mode 100644
index a2fc78154f1..00000000000
--- a/drivers/sound/sound-i2s.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Samsung Electronics
- * R. Chandrasekar <rcse...@samsung.com>
- */
-
-#include <malloc.h>
-#include <common.h>
-#include <asm/io.h>
-#include <linux/libfdt.h>
-#include <fdtdec.h>
-#include <i2c.h>
-#include <i2s.h>
-#include <sound.h>
-#include <asm/arch/sound.h>
-#include "wm8994.h"
-#include "max98095.h"
-
-/* defines */
-#define SOUND_400_HZ 400
-#define SOUND_BITS_IN_BYTE 8
-
-static struct i2s_uc_priv g_i2stx_pri;
-
-/*
- * get_sound_i2s_values gets values for i2s parameters
- *
- * @param i2s_uc_priv i2s transmitter transfer param structure
- * @param blob FDT blob if enabled else NULL
- */
-static int get_sound_i2s_values(struct i2s_uc_priv *i2s, const void *blob)
-{
- int node;
- int error = 0;
- int base;
-
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- return -1;
- }
-
- /*
- * Get the pre-defined sound specific values from FDT.
- * All of these are expected to be correct otherwise
- * wrong register values in i2s setup parameters
- * may result in no sound play.
- */
- base = fdtdec_get_addr(blob, node, "reg");
- if (base == FDT_ADDR_T_NONE) {
- debug("%s: Missing i2s base\n", __func__);
- return -1;
- }
- i2s->base_address = base;
-
- i2s->audio_pll_clk = fdtdec_get_int(blob,
- node, "samsung,i2s-epll-clock-frequency", -1);
- error |= i2s->audio_pll_clk;
- debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
- i2s->samplingrate = fdtdec_get_int(blob,
- node, "samsung,i2s-sampling-rate", -1);
- error |= i2s->samplingrate;
- debug("samplingrate = %d\n", i2s->samplingrate);
- i2s->bitspersample = fdtdec_get_int(blob,
- node, "samsung,i2s-bits-per-sample", -1);
- error |= i2s->bitspersample;
- debug("bitspersample = %d\n", i2s->bitspersample);
- i2s->channels = fdtdec_get_int(blob,
- node, "samsung,i2s-channels", -1);
- error |= i2s->channels;
- debug("channels = %d\n", i2s->channels);
- i2s->rfs = fdtdec_get_int(blob,
- node, "samsung,i2s-lr-clk-framesize", -1);
- error |= i2s->rfs;
- debug("rfs = %d\n", i2s->rfs);
- i2s->bfs = fdtdec_get_int(blob,
- node, "samsung,i2s-bit-clk-framesize", -1);
- error |= i2s->bfs;
- debug("bfs = %d\n", i2s->bfs);
-
- i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
- error |= i2s->id;
- debug("id = %d\n", i2s->id);
-
- if (error == -1) {
- debug("fail to get sound i2s node properties\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Init codec
- *
- * @param blob FDT blob
- * @param pi2s_tx i2s parameters required by codec
- * @return int value, 0 for success
- */
-static int codec_init(const void *blob, struct i2s_uc_priv *pi2s_tx)
-{
- int ret;
- const char *codectype;
- int node;
-
- /* Get the node from FDT for sound */
- node = fdt_path_offset(blob, "i2s");
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for sound in device tree\n");
- debug("node = %d\n", node);
- return -1;
- }
-
- /*
- * Get the pre-defined sound codec specific values from FDT.
- * All of these are expected to be correct otherwise sound
- * can not be played
- */
- codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
- debug("device = %s\n", codectype);
- if (!strcmp(codectype, "wm8994")) {
- /* Check the codec type and initialise the same */
- ret = wm8994_init(blob, pi2s_tx->id, pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample, pi2s_tx->channels);
- } else if (!strcmp(codectype, "max98095")) {
- ret = max98095_init(blob, pi2s_tx->id, pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample);
- } else {
- debug("%s: Unknown codec type %s\n", __func__, codectype);
- return -1;
- }
-
- if (ret) {
- debug("%s: Codec init failed\n", __func__);
- return -1;
- }
-
- return 0;
-}
-
-int sound_init(const void *blob)
-{
- int ret;
- struct i2s_uc_priv *pi2s_tx = &g_i2stx_pri;
-
- /* Get the I2S Values */
- if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
- debug(" FDT I2S values failed\n");
- return -1;
- }
-
- if (codec_init(blob, pi2s_tx) < 0) {
- debug(" Codec init failed\n");
- return -1;
- }
-
- ret = i2s_tx_init(pi2s_tx);
- if (ret) {
- debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
- ret);
- return ret;
- }
-
-
- return ret;
-}
-
-int sound_play(uint32_t msec, uint32_t frequency)
-{
- unsigned int *data;
- unsigned long data_size;
- unsigned int ret = 0;
-
- /*Buffer length computation */
- data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
- data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
- data = malloc(data_size);
-
- if (data == NULL) {
- debug("%s: malloc failed\n", __func__);
- return -1;
- }
-
- sound_create_square_wave(g_i2stx_pri.samplingrate,
- (unsigned short *)data,
- data_size / sizeof(unsigned short),
- frequency);
-
- while (msec >= 1000) {
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
- (data_size / sizeof(int)));
- msec -= 1000;
- }
- if (msec) {
- unsigned long size =
- (data_size * msec) / (sizeof(int) * 1000);
-
- ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
- }
-
- free(data);
-
- return ret;
-}
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
index d2b22fb1d7f..8421909f369 100644
--- a/drivers/sound/wm8994.c
+++ b/drivers/sound/wm8994.c
@@ -40,7 +40,6 @@ struct wm8994_priv {
int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */
int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */
struct wm8994_fll_config fll[2]; /* fll config to configure fll */
- int i2c_addr;
struct udevice *dev;
};
@@ -82,12 +81,7 @@ static int wm8994_i2c_write(struct wm8994_priv *priv,
unsigned int reg,
val[1] = (unsigned char)(data & 0xff);
debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data);
-#ifdef CONFIG_DM_SOUND
- debug("dev = %s\n", priv->dev->name);
return dm_i2c_write(priv->dev, reg, val, 2);
-#else
- return i2c_write(priv->i2c_addr, reg, 2, val, 2);
-#endif
}
/*
@@ -105,11 +99,7 @@ static unsigned int wm8994_i2c_read(struct wm8994_priv
*priv, unsigned int reg,
unsigned char val[2];
int ret;
-#ifdef CONFIG_DM_SOUND
ret = dm_i2c_read(priv->dev, reg, val, 1);
-#else
- ret = i2c_read(priv->i2c_addr, reg, 2, val, 2);
-#endif
if (ret != 0) {
debug("%s: Error while reading register %#04x\n",
__func__, reg);
@@ -820,61 +810,6 @@ err:
return -1;
}
-#ifndef CONFIG_DM_SOUND
-/*
- * Gets fdt values for wm8994 config parameters
- *
- * @param pcodec_info codec information structure
- * @param blob FDT blob
- * @return int value, 0 for success
- */
-static int get_codec_values(struct sound_codec_info *pcodec_info,
- const void *blob)
-{
- int error = 0;
- enum fdt_compat_id compat;
- int node;
- int parent;
-
- /* Get the node from FDT for codec */
- node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC);
- if (node <= 0) {
- debug("EXYNOS_SOUND: No node for codec in device tree\n");
- debug("node = %d\n", node);
- return -1;
- }
-
- parent = fdt_parent_offset(blob, node);
- if (parent < 0) {
- debug("%s: Cannot find node parent\n", __func__);
- return -1;
- }
-
- compat = fdtdec_lookup(blob, parent);
- switch (compat) {
- case COMPAT_SAMSUNG_S3C2440_I2C:
- pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
- error |= pcodec_info->i2c_bus;
- debug("i2c bus = %d\n", pcodec_info->i2c_bus);
- pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
- "reg", 0);
- error |= pcodec_info->i2c_dev_addr;
- debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
- break;
- default:
- debug("%s: Unknown compat id %d\n", __func__, compat);
- return -1;
- }
-
- if (error == -1) {
- debug("fail to get wm8994 codec node properties\n");
- return -1;
- }
-
- return 0;
-}
-#endif
-
static int _wm8994_init(struct wm8994_priv *priv,
enum en_audio_interface aif_id, int sampling_rate,
int mclk_freq, int bits_per_sample,
@@ -906,36 +841,6 @@ static int _wm8994_init(struct wm8994_priv *priv,
return ret;
}
-#ifndef CONFIG_DM_SOUND
-/* WM8994 Device Initialisation */
-int wm8994_init(const void *blob, enum en_audio_interface aif_id,
- int sampling_rate, int mclk_freq, int bits_per_sample,
- unsigned int channels)
-{
- struct sound_codec_info pcodec_info;
- struct wm8994_priv wm8994_info;
- int ret;
-
- /* Get the codec Values */
- if (get_codec_values(&pcodec_info, blob) < 0) {
- debug("FDT Codec values failed\n");
- return -1;
- }
-
- /* shift the device address by 1 for 7 bit addressing */
- wm8994_info.i2c_addr = pcodec_info.i2c_dev_addr;
- i2c_set_bus_num(pcodec_info.i2c_bus);
- ret = wm8994_device_init(&wm8994_info);
- if (ret < 0) {
- debug("%s: wm8994 codec chip init failed\n", __func__);
- return ret;
- }
-
- return _wm8994_init(&wm8994_info, aif_id, sampling_rate, mclk_freq,
- bits_per_sample, channels);
-}
-#endif
-
static int wm8994_set_params(struct udevice *dev, int interface, int rate,
int mclk_freq, int bits_per_sample, uint channels)
{
diff --git a/include/sound.h b/include/sound.h
index a8235a75b9c..494d0a448ed 100644
--- a/include/sound.h
+++ b/include/sound.h
@@ -52,7 +52,6 @@ void sound_create_square_wave(uint sample_rate, unsigned
short *data, int size,
*/
int sound_init(const void *blob);
-#ifdef CONFIG_DM_SOUND
/*
* The sound uclass brings together a data transport (currently only I2C) and a
* codec (currently connected over I2C).
@@ -101,14 +100,4 @@ int sound_beep(struct udevice *dev, int msecs, int
frequency_hz);
*/
int sound_find_codec_i2s(struct udevice *dev);
-#else
-/*
- * plays the pcm data buffer in pcm_data.h through i2s1 to make the
- * sine wave sound
- *
- * @return int 0 for success, -1 for error
- */
-int sound_play(uint32_t msec, uint32_t frequency);
-#endif /* CONFIG_DM_SOUND */
-
#endif /* __SOUND__H__ */
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 0c1459cd4db..43c2e7535b1 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_UT_DM) += test-uclass.o
# subsystem you must add sandbox tests here.
obj-$(CONFIG_UT_DM) += core.o
ifneq ($(CONFIG_SANDBOX),)
-obj-$(CONFIG_DM_SOUND) += audio.o
+obj-$(CONFIG_SOUND) += audio.o
obj-$(CONFIG_BLK) += blk.o
obj-$(CONFIG_BOARD) += board.o
obj-$(CONFIG_CLK) += clk.o
@@ -21,7 +21,7 @@ obj-$(CONFIG_DM_ETH) += eth.o
obj-$(CONFIG_FIRMWARE) += firmware.o
obj-$(CONFIG_DM_GPIO) += gpio.o
obj-$(CONFIG_DM_I2C) += i2c.o
-obj-$(CONFIG_DM_SOUND) += i2s.o
+obj-$(CONFIG_SOUND) += i2s.o
obj-$(CONFIG_LED) += led.o
obj-$(CONFIG_DM_MAILBOX) += mailbox.o
obj-$(CONFIG_DM_MMC) += mmc.o
@@ -54,7 +54,7 @@ obj-$(CONFIG_AXI) += axi.o
obj-$(CONFIG_MISC) += misc.o
obj-$(CONFIG_DM_SERIAL) += serial.o
obj-$(CONFIG_CPU) += cpu.o
-obj-$(CONFIG_DM_SOUND) += sound.o
+obj-$(CONFIG_SOUND) += sound.o
obj-$(CONFIG_TEE) += tee.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
endif
--
2.20.0.rc1.387.gf8505762e3-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
