On Thu, Nov 29, 2018 at 6:40 PM Tom Rini <tr...@konsulko.com> wrote: > > On Tue, Nov 27, 2018 at 06:20:08PM -0200, Otavio Salvador wrote: > > > The motivation for this is to allow distributions to distribute all > > possible tools in a generic way, avoiding the need of specific tools > > building for each machine. > > > > Especially on OpenEmbedded / Yocto Project ecosystem, it is very > > common each BSP to end providing their specific tools when they need > > to generate images for some SoC (e.g MX23 / MX28 in meta-freescale > > case). > > > > Using this, we can package the tools doing: > > > > $: make tools-only_defconfig > > $: make tools-only > > > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > > --- > > > > configs/tools-only_defconfig | 3 +++ > > tools/Makefile | 2 +- > > 2 files changed, 4 insertions(+), 1 deletion(-) > > create mode 100644 configs/tools-only_defconfig > > > > diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig > > new file mode 100644 > > index 0000000000..be69bdf43a > > --- /dev/null > > +++ b/configs/tools-only_defconfig > > @@ -0,0 +1,3 @@ > > +CONFIG_SYS_TEXT_BASE=0 > > +CONFIG_FIT=y > > +CONFIG_FIT_SIGNATURE=y > > diff --git a/tools/Makefile b/tools/Makefile > > index 3c0521f655..e916d0cebb 100644 > > --- a/tools/Makefile > > +++ b/tools/Makefile > > @@ -124,7 +124,7 @@ fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o > > fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o > > file2include-objs := file2include.o > > > > -ifneq ($(CONFIG_MX23)$(CONFIG_MX28),) > > +ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),) > > # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register > > # the mxsimage support within tools/mxsimage.c . > > HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS > > Adding in Peter since Fedora had this same problem crop up. Does > something like this work for you guys? Also adding in Vagrant Cascadian > since Debian might want to switch to this too. Thoughts? Thanks!
We currently use the tools-all option, details below, to build the tools, which broken in 2018.11 on non arm/x86 platforms due to the sandbox dep being added in there. I'm happy to adjust as necessary to fix that but I'm not sure the difference between tools-all vs the above. make CROSS_COMPILE="" defconfig V=1 O=builds/ make CROSS_COMPILE="" tools-all V=1 O=builds/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
