Now that we have FAN53555 support, we can enable the regulators in our
DTS. To make these easier to identify on the U-Boot commandline, we
rename them to the names of the voltage rails they control.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/rk3399-puma.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 11ffcb7..ba9bb4c 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -218,7 +218,8 @@
i2c-scl-falling-time-ns = <4>;
clock-frequency = <400000>;
- vdd_gpu: fan535555@60 {
+ vdd_gpu: vdd_gpu {
+ status = "okay";
compatible = "fcs,fan53555";
reg = <0x60>;
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -420,7 +421,8 @@
status = "okay";
clock-frequency = <400000>;
- vdd_cpu_b: fan53555@60 {
+ vdd_cpu_b: vdd_cpu_b {
+ status = "okay";
compatible = "fcs,fan53555";
reg = <0x60>;
vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
