The driver for the dw_mmc depends on the bounce buffer utility
functions. Unconditionally select BOUNCE_BUFFER, when DW_MMC is
enabled.
This also includes the postprocessing of the config-headers to
drop now-unused comments after moveconfig has run.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Reviewed-by: Otavio Salvador <ota...@ossystems.com.br>
---
Changes in v2: None
drivers/mmc/Kconfig | 1 +
include/configs/emsdp.h | 2 --
include/configs/exynos-common.h | 2 --
include/configs/hikey.h | 2 --
include/configs/hsdk.h | 4 ----
include/configs/iot_devkit.h | 2 --
include/configs/poplar.h | 2 --
include/configs/rk3036_common.h | 2 --
include/configs/rk3128_common.h | 2 --
include/configs/rk3188_common.h | 2 --
include/configs/rk322x_common.h | 2 --
include/configs/rk3288_common.h | 2 --
include/configs/rk3328_common.h | 3 ---
13 files changed, 1 insertion(+), 27 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index fbd1396..65d43a5 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -178,6 +178,7 @@ config MMC_DAVINCI
config MMC_DW
bool "Synopsys DesignWare Memory Card Interface"
+ select BOUNCE_BUFFER
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
diff --git a/include/configs/emsdp.h b/include/configs/emsdp.h
index a77f262..23c71f4 100644
--- a/include/configs/emsdp.h
+++ b/include/configs/emsdp.h
@@ -18,8 +18,6 @@
#define CONFIG_SYS_MALLOC_LEN SZ_64K
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-/* Required by DW MMC driver */
-
/*
* Environment
*/
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 543bf8e..752acc5 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -34,8 +34,6 @@
/* select serial console configuration */
-/* SD/MMC configuration */
-
/* PWM */
#define CONFIG_PWM
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 3a308cf..6d9e6eb 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -53,8 +53,6 @@
#define CONFIG_HIKEY_GPIO
-/* SD/MMC configuration */
-
/* Command line configuration */
/* BOOTP options */
diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h
index bafd8d0..2ec2fd1 100644
--- a/include/configs/hsdk.h
+++ b/include/configs/hsdk.h
@@ -116,10 +116,6 @@ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0"
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-/*
- * Misc utility configuration
- */
-
/* Cli configuration */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/iot_devkit.h b/include/configs/iot_devkit.h
index 1f40d61..cd1309d 100644
--- a/include/configs/iot_devkit.h
+++ b/include/configs/iot_devkit.h
@@ -71,8 +71,6 @@
CONFIG_SYS_MALLOC_LEN - \
CONFIG_ENV_SIZE
-/* Required by DW MMC driver */
-
/*
* Environment
*/
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index 6ca9ae9..a7a77ec 100644
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -26,8 +26,6 @@
/* USB configuration */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-/* SD/MMC */
-
/*****************************************************************************
* Initial environment variables
*****************************************************************************/
diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index 301bd2f..e307855 100644
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -24,8 +24,6 @@
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK30"
-/* MMC/SD IP block */
-
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define SDRAM_BANK_SIZE (512UL << 20UL)
#define SDRAM_MAX_SIZE (CONFIG_NR_DRAM_BANKS *
SDRAM_BANK_SIZE)
diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h
index a8a4e02..f4f64ed 100644
--- a/include/configs/rk3128_common.h
+++ b/include/configs/rk3128_common.h
@@ -23,8 +23,6 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
-/* MMC/SD IP block */
-
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h
index 23938f7..612d643 100644
--- a/include/configs/rk3188_common.h
+++ b/include/configs/rk3188_common.h
@@ -33,8 +33,6 @@
#define CONFIG_SPL_STACK 0x10087fff
-/* MMC/SD IP block */
-
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define SDRAM_BANK_SIZE (2UL << 30)
#define SDRAM_MAX_SIZE 0x80000000
diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h
index 4c658b0..e72aa8d 100644
--- a/include/configs/rk322x_common.h
+++ b/include/configs/rk322x_common.h
@@ -25,8 +25,6 @@
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (28 << 10)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK32"
-/* MMC/SD IP block */
-
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define SDRAM_BANK_SIZE (512UL << 20UL)
#define SDRAM_MAX_SIZE 0x80000000
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 79b62d6..01f297b 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -29,8 +29,6 @@
# define CONFIG_SPL_TEXT_BASE 0xff704000
#endif
-/* MMC/SD IP block */
-
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index a7df976..7913ef7 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -19,9 +19,6 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
-/* MMC/SD IP block */
-
-/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
