Am 28.11.18 um 19:23 schrieb Álvaro Fernández Rojas: > BCM6348 IUDMA controller is present on multiple BMIPS (BCM63xx) SoCs. > > Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com> > --- > v9: introduce dma_prepare_rcv_buf dma op: > - bcm6348_iudma_chan_stop: switch to mdelay when resetting channel. > - bcm6348_iudma_receive: track dirty dma descriptors and no longer trigger > dma rx channel. > - bcm6348_iudma_send: reorder to properly flush cache and set dma descriptor > config. > - bcm6348_iudma_prepare_rcv_buf: implemented to clear dirty dma descriptors. > v8: Introduce changes from Grygorii Strashko > v5: Several fixes and improvements: > - Remove unused defines. > - Increment rx descriptors. > - Fix flow control issues. > - Error checking now depends on hw. > - Remove unneeded interrupts. > v4: Fix issues reported by Grygorii Strashko and other fixes: > - Remove usage of net_rx_packets as buffer. > - Allocate dynamic rx buffer. > - Check dma errors and discard invalid packets. > v3: no changes > v2: Fix dma rx burst config and select DMA_CHANNELS. > > drivers/dma/Kconfig | 9 + > drivers/dma/Makefile | 1 + > drivers/dma/bcm6348-iudma.c | 576 > ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 586 insertions(+) > create mode 100644 drivers/dma/bcm6348-iudma.c > > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig > index 8a4162eccd..1820676d7a 100644 > --- a/drivers/dma/Kconfig > +++ b/drivers/dma/Kconfig > @@ -26,6 +26,15 @@ config SANDBOX_DMA > Enable support for a test DMA uclass implementation. It stimulates > DMA transfer by simple copying data between channels. > > +config BCM6348_IUDMA > + bool "BCM6348 IUDMA driver" > + depends on ARCH_BMIPS > + select DMA_CHANNELS > + help > + Enable the BCM6348 IUDMA driver. > + This driver support data transfer from devices to > + memory and from memory to devices. > + > config TI_EDMA3 > bool "TI EDMA3 driver" > help > diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile > index aff31f986a..b5f9147e0a 100644 > --- a/drivers/dma/Makefile > +++ b/drivers/dma/Makefile > @@ -7,6 +7,7 @@ obj-$(CONFIG_DMA) += dma-uclass.o > > obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o > obj-$(CONFIG_APBH_DMA) += apbh_dma.o > +obj-$(CONFIG_BCM6348_IUDMA) += bcm6348-iudma.o > obj-$(CONFIG_FSL_DMA) += fsl_dma.o > obj-$(CONFIG_SANDBOX_DMA) += sandbox-dma-test.o > obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o > diff --git a/drivers/dma/bcm6348-iudma.c b/drivers/dma/bcm6348-iudma.c > new file mode 100644 > index 0000000000..284735fff3 > --- /dev/null > +++ b/drivers/dma/bcm6348-iudma.c > @@ -0,0 +1,576 @@ > +/* > + * Copyright (C) 2018 Álvaro Fernández Rojas <nolt...@gmail.com> > + * > + * Derived from linux/drivers/dma/bcm63xx-iudma.c: > + * Copyright (C) 2015 Simon Arlott <si...@fire.lp0.eu> > + * > + * Derived from linux/drivers/net/ethernet/broadcom/bcm63xx_enet.c: > + * Copyright (C) 2008 Maxime Bizon <mbi...@freebox.fr> > + * > + * Derived from > bcm963xx_4.12L.06B_consumer/shared/opensource/include/bcm963xx/63268_map_part.h: > + * Copyright (C) 2000-2010 Broadcom Corporation > + * > + * Derived from > bcm963xx_4.12L.06B_consumer/bcmdrivers/opensource/net/enet/impl4/bcmenet.c: > + * Copyright (C) 2010 Broadcom Corporation > + * > + * SPDX-License-Identifier: GPL-2.0+
// SPDX-License-Identifier: GPL-2.0+
must be the first line of the file
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <dma-uclass.h>
> +#include <memalign.h>
> +#include <reset.h>
> +#include <asm/io.h>
> +
> +#define DMA_RX_DESC 6
> +#define DMA_TX_DESC 1
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define ALIGN_END_ADDR(type, ptr, size) \
> + ((unsigned long)(ptr) + roundup((size) * sizeof(type), \
> + ARCH_DMA_MINALIGN))
> +
> +/* DMA Channels */
> +#define DMA_CHAN_FLOWC(x) ((x) >> 1)
> +#define DMA_CHAN_MAX 16
> +#define DMA_CHAN_SIZE 0x10
> +#define DMA_CHAN_TOUT 500
> +
> +/* DMA Global Configuration register */
> +#define DMA_CFG_REG 0x00
> +#define DMA_CFG_ENABLE_SHIFT 0
> +#define DMA_CFG_ENABLE_MASK (1 << DMA_CFG_ENABLE_SHIFT)
> +#define DMA_CFG_FLOWC_ENABLE(x) BIT(DMA_CHAN_FLOWC(x) + 1)
> +#define DMA_CFG_NCHANS_SHIFT 24
> +#define DMA_CFG_NCHANS_MASK (0xf << DMA_CFG_NCHANS_SHIFT)
> +
> +/* DMA Global Flow Control registers */
> +#define DMA_FLOWC_THR_LO_REG(x) (0x04 + DMA_CHAN_FLOWC(x) *
> 0x0c)
> +#define DMA_FLOWC_THR_HI_REG(x) (0x08 + DMA_CHAN_FLOWC(x) *
> 0x0c)
> +#define DMA_FLOWC_ALLOC_REG(x) (0x0c + DMA_CHAN_FLOWC(x) *
> 0x0c)
> +#define DMA_FLOWC_ALLOC_FORCE_SHIFT 31
> +#define DMA_FLOWC_ALLOC_FORCE_MASK (1 << DMA_FLOWC_ALLOC_FORCE_SHIFT)
> +
> +/* DMA Global Reset register */
> +#define DMA_RST_REG 0x34
> +#define DMA_RST_CHAN_SHIFT 0
> +#define DMA_RST_CHAN_MASK(x) (1 << x)
> +
> +/* DMA Channel Configuration register */
> +#define DMAC_CFG_REG(x) (DMA_CHAN_SIZE * (x) + 0x00)
> +#define DMAC_CFG_ENABLE_SHIFT 0
> +#define DMAC_CFG_ENABLE_MASK (1 << DMAC_CFG_ENABLE_SHIFT)
> +#define DMAC_CFG_PKT_HALT_SHIFT 1
> +#define DMAC_CFG_PKT_HALT_MASK (1 << DMAC_CFG_PKT_HALT_SHIFT)
> +#define DMAC_CFG_BRST_HALT_SHIFT 2
> +#define DMAC_CFG_BRST_HALT_MASK (1 << DMAC_CFG_BRST_HALT_SHIFT)
> +
> +/* DMA Channel Max Burst Length register */
> +#define DMAC_BURST_REG(x) (DMA_CHAN_SIZE * (x) + 0x0c)
> +
> +/* DMA SRAM Descriptor Ring Start register */
> +#define DMAS_RSTART_REG(x) (DMA_CHAN_SIZE * (x) + 0x00)
> +
> +/* DMA SRAM State/Bytes done/ring offset register */
> +#define DMAS_STATE_DATA_REG(x) (DMA_CHAN_SIZE * (x) + 0x04)
> +
> +/* DMA SRAM Buffer Descriptor status and length register */
> +#define DMAS_DESC_LEN_STATUS_REG(x) (DMA_CHAN_SIZE * (x) + 0x08)
> +
> +/* DMA SRAM Buffer Descriptor status and length register */
> +#define DMAS_DESC_BASE_BUFPTR_REG(x) (DMA_CHAN_SIZE * (x) + 0x0c)
> +
> +struct bcm6348_dma_desc {
> + uint16_t length;
> +
> + uint16_t status;
> +#define DMAD_ST_CRC_SHIFT 8
> +#define DMAD_ST_CRC_MASK (1 << DMAD_ST_CRC_SHIFT)
> +#define DMAD_ST_WRAP_SHIFT 12
> +#define DMAD_ST_WRAP_MASK (1 << DMAD_ST_WRAP_SHIFT)
> +#define DMAD_ST_SOP_SHIFT 13
> +#define DMAD_ST_SOP_MASK (1 << DMAD_ST_SOP_SHIFT)
> +#define DMAD_ST_EOP_SHIFT 14
> +#define DMAD_ST_EOP_MASK (1 << DMAD_ST_EOP_SHIFT)
> +#define DMAD_ST_OWN_SHIFT 15
> +#define DMAD_ST_OWN_MASK (1 << DMAD_ST_OWN_SHIFT)
> +
> +#define DMAD6348_ST_OV_ERR_SHIFT 0
> +#define DMAD6348_ST_OV_ERR_MASK (1 << DMAD6348_ST_OV_ERR_SHIFT)
> +#define DMAD6348_ST_CRC_ERR_SHIFT 1
> +#define DMAD6348_ST_CRC_ERR_MASK (1 << DMAD6348_ST_CRC_ERR_SHIFT)
> +#define DMAD6348_ST_RX_ERR_SHIFT 2
> +#define DMAD6348_ST_RX_ERR_MASK (1 << DMAD6348_ST_RX_ERR_SHIFT)
> +#define DMAD6348_ST_OS_ERR_SHIFT 4
> +#define DMAD6348_ST_OS_ERR_MASK (1 << DMAD6348_ST_OS_ERR_SHIFT)
> +#define DMAD6348_ST_UN_ERR_SHIFT 9
> +#define DMAD6348_ST_UN_ERR_MASK (1 << DMAD6348_ST_UN_ERR_SHIFT)
I would move this out of the struct definition
> +
> + uint32_t address;
> +} __attribute__((aligned(1)));
__aligned(1)? But what's the sense of aligning to 1 byte?
> +
> +struct bcm6348_chan_priv {
> + void __iomem *dma_buff;
> + void __iomem *dma_ring;
> + uint8_t dma_ring_size;
> + uint8_t desc_id;
> + uint8_t dirty_cnt;
> + uint8_t dirty_desc;
> +};
> +
> +struct bcm6348_iudma_hw {
> + uint16_t err_mask;
> +};
> +
> +struct bcm6348_iudma_priv {
> + const struct bcm6348_iudma_hw *hw;
> + void __iomem *base;
> + void __iomem *chan;
> + void __iomem *sram;
> + struct bcm6348_chan_priv **ch_priv;
> + uint8_t n_channels;
> +};
> +
> +static inline bool bcm6348_iudma_chan_is_rx(uint8_t ch)
> +{
> + return !(ch & 1);
> +}
> +
> +static void bcm6348_iudma_chan_stop(struct bcm6348_iudma_priv *priv,
> + uint8_t ch)
> +{
> + unsigned int timeout = DMA_CHAN_TOUT;
> +
> + do {
> + uint32_t cfg, halt;
> +
> + if (timeout > DMA_CHAN_TOUT / 2)
> + halt = DMAC_CFG_PKT_HALT_MASK;
> + else
> + halt = DMAC_CFG_BRST_HALT_MASK;
> +
> + /* try to stop dma channel */
> + writel_be(halt, priv->chan + DMAC_CFG_REG(ch));
> + mb();
> +
> + /* check if channel was stopped */
> + cfg = readl_be(priv->chan + DMAC_CFG_REG(ch));
> + if (!(cfg & DMAC_CFG_ENABLE_MASK))
> + break;
> +
> + udelay(1);
> + } while (--timeout);
> +
> + if (!timeout)
> + pr_err("unable to stop channel %u\n", ch);
> +
> + /* reset dma channel */
> + setbits_be32(priv->base + DMA_RST_REG, DMA_RST_CHAN_MASK(ch));
> + mdelay(1);
> + clrbits_be32(priv->base + DMA_RST_REG, DMA_RST_CHAN_MASK(ch));
> +}
> +
> +static int bcm6348_iudma_disable(struct dma *dma)
> +{
> + struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> +
> + bcm6348_iudma_chan_stop(priv, dma->id);
> +
> + if (bcm6348_iudma_chan_is_rx(dma->id))
> + writel_be(DMA_FLOWC_ALLOC_FORCE_MASK,
> + DMA_FLOWC_ALLOC_REG(dma->id));
> +
> + return 0;
> +}
> +
> +static int bcm6348_iudma_enable(struct dma *dma)
> +{
> + const struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> + struct bcm6348_chan_priv *ch_priv = priv->ch_priv[dma->id];
> + struct bcm6348_dma_desc *dma_desc;
> + void __iomem *dma_buff = ch_priv->dma_buff;
> + uint8_t i;
> +
> + /* init dma rings */
> + dma_desc = ch_priv->dma_ring;
> + for (i = 0; i < ch_priv->dma_ring_size; i++) {
> + uint16_t status;
> +
> + if (bcm6348_iudma_chan_is_rx(dma->id)) {
> + status = DMAD_ST_OWN_MASK;
> + dma_desc->length = PKTSIZE_ALIGN;
> + dma_desc->address = virt_to_phys(dma_buff);
> + dma_buff += PKTSIZE_ALIGN;
shouldn't this be somehow set by a consumer driver instead of
hard-coding the size of a network packet?
> + } else {
> + status = 0;
> + dma_desc->length = 0;
> + dma_desc->address = 0;
> + }
> +
> + if (i == ch_priv->dma_ring_size - 1)
> + status |= DMAD_ST_WRAP_MASK;
> +
> + dma_desc->status = status;
> +
> + dma_desc++;
> + }
> +
> + /* init to first descriptor */
> + ch_priv->desc_id = 0;
> + ch_priv->dirty_desc = 0;
> + ch_priv->dirty_cnt = 0;
> +
> + /* force cache writeback */
> + flush_dcache_range((ulong)ch_priv->dma_ring,
> + ALIGN_END_ADDR(struct bcm6348_dma_desc, ch_priv->dma_ring,
> + ch_priv->dma_ring_size));
> +
> + /* clear sram */
> + writel_be(0, priv->sram + DMAS_STATE_DATA_REG(dma->id));
> + writel_be(0, priv->sram + DMAS_DESC_LEN_STATUS_REG(dma->id));
> + writel_be(0, priv->sram + DMAS_DESC_BASE_BUFPTR_REG(dma->id));
> +
> + /* set dma ring start */
> + writel_be(virt_to_phys(ch_priv->dma_ring),
> + priv->sram + DMAS_RSTART_REG(dma->id));
> +
> + /* set flow control */
> + if (bcm6348_iudma_chan_is_rx(dma->id)) {
> + u32 val;
> +
> + setbits_be32(priv->base + DMA_CFG_REG,
> + DMA_CFG_FLOWC_ENABLE(dma->id));
> +
> + val = ch_priv->dma_ring_size / 3;
> + writel_be(val, priv->base + DMA_FLOWC_THR_LO_REG(dma->id));
> +
> + val = (ch_priv->dma_ring_size * 2) / 3;
> + writel_be(val, priv->base + DMA_FLOWC_THR_HI_REG(dma->id));
> +
> + writel_be(0, priv->base + DMA_FLOWC_ALLOC_REG(dma->id));
> + }
> +
> + /* set dma max burst */
> + writel_be(ch_priv->dma_ring_size,
> + priv->chan + DMAC_BURST_REG(dma->id));
> +
> + /* kick dma channel */
> + setbits_be32(priv->chan + DMAC_CFG_REG(dma->id), DMAC_CFG_ENABLE_MASK);
> +
> + return 0;
> +}
> +
> +static int bcm6348_iudma_request(struct dma *dma)
> +{
> + const struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> + struct bcm6348_chan_priv *ch_priv;
> +
> + /* check if channel is valid */
> + if (dma->id >= priv->n_channels)
> + return -ENODEV;
> +
> + /* alloc channel private data */
> + priv->ch_priv[dma->id] = calloc(1, sizeof(struct bcm6348_chan_priv));
> + if (!priv->ch_priv[dma->id])
> + return -ENOMEM;
> + ch_priv = priv->ch_priv[dma->id];
> +
> + /* alloc dma ring */
> + if (bcm6348_iudma_chan_is_rx(dma->id))
> + ch_priv->dma_ring_size = DMA_RX_DESC;
> + else
> + ch_priv->dma_ring_size = DMA_TX_DESC;
> +
> + ch_priv->dma_ring =
> + malloc_cache_aligned(sizeof(struct bcm6348_dma_desc) *
> + ch_priv->dma_ring_size);
> + if (!ch_priv->dma_ring)
> + return -ENOMEM;
> +
> + if (bcm6348_iudma_chan_is_rx(dma->id)) {
> + ch_priv->dma_buff =
> + malloc_cache_aligned(PKTSIZE_ALIGN *
> + ch_priv->dma_ring_size);
> + if (!ch_priv->dma_buff)
> + return -ENOMEM;
> + } else {
> + ch_priv->dma_buff = NULL;
> + }
> +
> + return 0;
> +}
> +
> +static int bcm6348_iudma_receive(struct dma *dma, void **dst, void *metadata)
> +{
> + const struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> + const struct bcm6348_iudma_hw *hw = priv->hw;
> + struct bcm6348_chan_priv *ch_priv = priv->ch_priv[dma->id];
> + struct bcm6348_dma_desc *dma_desc;
> + void __iomem *dma_buff;
> + int ret;
> +
> + if (ch_priv->dirty_cnt == ch_priv->dma_ring_size) {
> + pr_err("dma rx ring full of dirty descriptors\n");
> + return -EAGAIN;
> + }
> +
> + /* get dma ring descriptor address */
> + dma_desc = ch_priv->dma_ring;
> + dma_desc += ch_priv->desc_id;
> +
> + /* invalidate cache data */
> + invalidate_dcache_range((ulong)dma_desc,
> + ALIGN_END_ADDR(struct bcm6348_dma_desc, dma_desc, 1));
> +
> + /* check dma own */
> + if (dma_desc->status & DMAD_ST_OWN_MASK)
> + return -EAGAIN;
> +
> + /* check pkt */
> + if (!(dma_desc->status & DMAD_ST_EOP_MASK) ||
> + !(dma_desc->status & DMAD_ST_SOP_MASK) ||
> + (dma_desc->status & hw->err_mask)) {
> + pr_err("invalid pkt received (ch=%ld) (st=%04x)\n",
> + dma->id, dma_desc->status);
> + ret = -EAGAIN;
> + } else {
> + uint16_t length;
> +
> + /* get dma buff descriptor address */
> + dma_buff = phys_to_virt(dma_desc->address);
> +
> + /* invalidate cache data */
> + invalidate_dcache_range((ulong)dma_buff,
> + (ulong)(dma_buff + PKTSIZE_ALIGN));
> +
> + /* remove crc */
> + length = dma_desc->length - 4;
> +
> + /* copy data */
> + memcpy(*dst, dma_buff, length);
why not returning the buffer address where the DMA transfered the data
to instead of making a copy?
> +
> + ret = length;
> + }
> +
> + /* increment dma descriptor */
> + ch_priv->desc_id = (ch_priv->desc_id + 1) % ch_priv->dma_ring_size;
> + ch_priv->dirty_cnt++;
> +
> + return ret;
> +}
> +
> +static int bcm6348_iudma_send(struct dma *dma, void *src, size_t len,
> + void *metadata)
> +{
> + const struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> + struct bcm6348_chan_priv *ch_priv = priv->ch_priv[dma->id];
> + struct bcm6348_dma_desc *dma_desc;
> + uint16_t status;
> +
> + /* flush cache */
> + flush_dcache_range((ulong)src, (ulong)src + PKTSIZE_ALIGN);
you pass a 'size_t len' but still use the hard-coded buffer size?
> +
> + /* get dma ring descriptor address */
> + dma_desc = ch_priv->dma_ring;
> + dma_desc += ch_priv->desc_id;
> +
> + /* config dma descriptor */
> + status = (DMAD_ST_OWN_MASK |
> + DMAD_ST_EOP_MASK |
> + DMAD_ST_CRC_MASK |
> + DMAD_ST_SOP_MASK);
> + if (ch_priv->desc_id == ch_priv->dma_ring_size - 1)
> + status |= DMAD_ST_WRAP_MASK;
> +
> + dma_desc->address = virt_to_phys(src);
> + dma_desc->length = len;
> + dma_desc->status = status;
> +
> + /* flush cache */
> + flush_dcache_range((ulong)dma_desc,
> + ALIGN_END_ADDR(struct bcm6348_dma_desc, dma_desc, 1));
> +
> + /* kick tx dma channel */
> + setbits_be32(priv->chan + DMAC_CFG_REG(dma->id), DMAC_CFG_ENABLE_MASK);
> +
> + /* poll dma status */
> + do {
> + /* invalidate cache */
> + invalidate_dcache_range((ulong)dma_desc,
> + ALIGN_END_ADDR(struct bcm6348_dma_desc, dma_desc, 1));
> +
> + if (!(dma_desc->status & DMAD_ST_OWN_MASK))
> + break;
> + } while(1);
> +
> + /* increment dma descriptor */
> + ch_priv->desc_id = (ch_priv->desc_id + 1) % ch_priv->dma_ring_size;
> +
> + return 0;
> +}
> +
> +int bcm6348_iudma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size)
> +{
> + const struct bcm6348_iudma_priv *priv = dev_get_priv(dma->dev);
> + struct bcm6348_chan_priv *ch_priv = priv->ch_priv[dma->id];
> +
> + /* init dma rings */
> + while (ch_priv->dirty_cnt) {
> + struct bcm6348_dma_desc *dma_desc = ch_priv->dma_ring;
> + uint16_t status = DMAD_ST_OWN_MASK;
> +
> + /* get dirty dma descriptor */
> + dma_desc += ch_priv->dirty_desc;
> +
> + /* reinit dirty dma descriptor */
> + if (ch_priv->dirty_desc == ch_priv->dma_ring_size - 1)
> + status |= DMAD_ST_WRAP_MASK;
> + dma_desc->length = PKTSIZE_ALIGN;
you pass a 'size_t size' but still use the hard-coded buffer size?
> + dma_desc->status = status;
> +
> + /* flush cache */
> + flush_dcache_range((ulong)dma_desc,
> + ALIGN_END_ADDR(struct bcm6348_dma_desc, dma_desc, 1));
> +
> + /* tell dma engine we allocated one buffer */
> + writel_be(1, DMA_FLOWC_ALLOC_REG(dma->id));
> +
> + /* bump dirty dma descriptor */
> + ch_priv->dirty_desc = (ch_priv->dirty_desc + 1) %
> + ch_priv->dma_ring_size;
> +
> + /* kick rx dma channel */
> + ch_priv->dirty_cnt--;
> + if (!ch_priv->dirty_cnt)
> + setbits_be32(priv->chan + DMAC_CFG_REG(dma->id),
> + DMAC_CFG_ENABLE_MASK);
> + }
> +
> + return 0;
> +}
> +
> +static const struct dma_ops bcm6348_iudma_ops = {
> + .disable = bcm6348_iudma_disable,
> + .enable = bcm6348_iudma_enable,
> + .prepare_rcv_buf = bcm6348_iudma_prepare_rcv_buf,
> + .request = bcm6348_iudma_request,
> + .receive = bcm6348_iudma_receive,
> + .send = bcm6348_iudma_send,
> +};
> +
> +static const struct bcm6348_iudma_hw bcm6348_hw = {
> + .err_mask = (DMAD6348_ST_OV_ERR_MASK |
> + DMAD6348_ST_CRC_ERR_MASK |
> + DMAD6348_ST_RX_ERR_MASK |
> + DMAD6348_ST_OS_ERR_MASK |
> + DMAD6348_ST_UN_ERR_MASK),
> +};
> +
> +static const struct bcm6348_iudma_hw bcm6368_hw = {
> + .err_mask = 0,
> +};
> +
> +static const struct udevice_id bcm6348_iudma_ids[] = {
> + {
> + .compatible = "brcm,bcm6348-iudma",
> + .data = (ulong)&bcm6348_hw,
> + }, {
> + .compatible = "brcm,bcm6368-iudma",
> + .data = (ulong)&bcm6368_hw,
> + }, { /* sentinel */ }
> +};
> +
> +static int bcm6348_iudma_probe(struct udevice *dev)
> +{
> + struct dma_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> + struct bcm6348_iudma_priv *priv = dev_get_priv(dev);
> + const struct bcm6348_iudma_hw *hw =
> + (const struct bcm6348_iudma_hw *)dev_get_driver_data(dev);
> + fdt_addr_t addr;
> + uint8_t ch;
> + int i;
> +
> + uc_priv->supported = (DMA_SUPPORTS_DEV_TO_MEM |
> + DMA_SUPPORTS_MEM_TO_DEV);
> + priv->hw = hw;
> +
> + /* try to enable clocks */
> + for (i = 0; ; i++) {
> + struct clk clk;
> + int ret;
> +
> + ret = clk_get_by_index(dev, i, &clk);
> + if (ret < 0)
> + break;
why not getting the reference once and do appropiate error handling.
Although it's only probing but this looks very inefficient
> + if (clk_enable(&clk))
> + pr_err("failed to enable clock %d\n", i);
> + clk_free(&clk);
> + }
> +
> + /* try to perform resets */
no error handling for clk_get_by_index()? I guess it doesn't make sense
to continue without enabled clocks?
> + for (i = 0; ; i++) {
> + struct reset_ctl reset;
> + int ret;
> +
> + ret = reset_get_by_index(dev, i, &reset);
> + if (ret < 0)
> + break;
> + if (reset_deassert(&reset))
> + pr_err("failed to deassert reset %d\n", i);
> + reset_free(&reset);
> + }
same here
> +
> + /* dma global base address */
> + addr = devfdt_get_addr_name(dev, "dma");
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> + priv->base = ioremap(addr, 0);
this is not compatible with DM live tree which you already enabled for
BMIPS platform. You should use dev_remap_addr_index() or you should add
a generic dev_remap_addr_name().
> +
> + /* dma channels base address */
> + addr = devfdt_get_addr_name(dev, "dma-channels");
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> + priv->chan = ioremap(addr, 0);
> +
> + /* dma sram base address */
> + addr = devfdt_get_addr_name(dev, "dma-sram");
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> + priv->sram = ioremap(addr, 0);
> +
> + /* disable dma controller */
> + clrbits_be32(priv->base + DMA_CFG_REG, DMA_CFG_ENABLE_MASK);
> +
> + /* get number of channels */
> + priv->n_channels = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
> + "dma-channels", 8);
dev_read_u32() ?
> + if (priv->n_channels > DMA_CHAN_MAX)
> + return -EINVAL;
> +
> + /* alloc channel private data pointers */
> + priv->ch_priv = calloc(priv->n_channels,
> + sizeof(struct bcm6348_chan_priv*));
> + if (!priv->ch_priv)
> + return -ENOMEM;
> +
> + /* stop dma channels */
> + for (ch = 0; ch < priv->n_channels; ch++)
> + bcm6348_iudma_chan_stop(priv, ch);
> +
> + /* enable dma controller */
> + setbits_be32(priv->base + DMA_CFG_REG, DMA_CFG_ENABLE_MASK);
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(bcm6348_iudma) = {
> + .name = "bcm6348_iudma",
> + .id = UCLASS_DMA,
> + .of_match = bcm6348_iudma_ids,
> + .ops = &bcm6348_iudma_ops,
> + .priv_auto_alloc_size = sizeof(struct bcm6348_iudma_priv),
> + .probe = bcm6348_iudma_probe,
> +};
>
--
- Daniel
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
