On Fri, Apr 9, 2010 at 10:07 AM, prakash bedge <prakash.be...@gmail.com> wrote: > Hi Frank, > > Why I should use MIRRORX16 in BDI3000 config file? >
According to the different flash algorithms described in the BDI manual, this was the closest we found, and it works. What chiptype do you use today? > Can you please tell which boards support the S29GL512P NOR flash? > None yet I think. We'll commit a patch soon which supports the Siemens Digital Powerline Modem (DPM). Our U-Boot/Linux hardware is based on Analogue & Micros Adder Module, but modified a bit (different flash and SDRAM, contains an FPGA, an AVR and a TI DSP). Best regards, Frank > Regards, > Prakash Bedge > On Fri, Apr 9, 2010 at 1:18 PM, Frank Svendsbøe <frank.svends...@gmail.com> > wrote: >> >> On Fri, Apr 9, 2010 at 7:26 AM, prakash bedge <prakash.be...@gmail.com> >> wrote: >> > Hi, >> > >> > In U-boot I am not seeing the support for Spansion S29GL512P NOR flash. >> > >> > This chip is CFI compliant so I believe the common CFI driver should >> > work >> > with this chip. >> > >> > Does U-boot supports S29GL512P NOR flash or I have to implement the >> > functionality to support S29GL512P? >> > >> > If anyone has tried with S29GL512P NOR flash please share the >> > experiecne. >> > >> >> Hi Prakash, >> >> I can confirm the S29GL512P is working with U-Boot (and Linux). No >> special work has been >> done to make it work. Use chiptype MIRRORX16, if you're using a >> BDI3000 JTAG to flash U-Boot. >> >> Good luck >> Frank >> >> > >> > Thanks & Regards, >> > Prakash >> > >> > _______________________________________________ >> > U-Boot mailing list >> > U-Boot@lists.denx.de >> > http://lists.denx.de/mailman/listinfo/u-boot >> > >> > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
