On Thu, Nov 15, 2018 at 2:19 PM <codekip...@gmail.com> wrote: > > From: Marcus Cooper <marc...@axis.com> > > The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, > 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the > SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a > dual colour LED and an optical S/PDIF connector. > > Signed-off-by: Marcus Cooper <codekip...@gmail.com> > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/sun8i-h3-beelink-x2.dts | 179 +++++++++++++++++++++++++++ > board/sunxi/MAINTAINERS | 5 + > configs/beelink_x2_defconfig | 19 +++ > 4 files changed, 204 insertions(+) > create mode 100644 arch/arm/dts/sun8i-h3-beelink-x2.dts > create mode 100644 configs/beelink_x2_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 1cbb45d679..cc217d4f98 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -370,6 +370,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ > sun8i-h2-plus-orangepi-r1.dtb \ > sun8i-h2-plus-orangepi-zero.dtb \ > sun8i-h3-bananapi-m2-plus.dtb \ > + sun8i-h3-beelink-x2.dtb \ > sun8i-h3-libretech-all-h3-cc.dtb \ > sun8i-h3-nanopi-m1.dtb \ > sun8i-h3-nanopi-m1-plus.dtb \ > diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts > b/arch/arm/dts/sun8i-h3-beelink-x2.dts > new file mode 100644 > index 0000000000..683c5c31a9 > --- /dev/null > +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts > @@ -0,0 +1,179 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +// > +// Device Tree Source for Beelink X2 > +// > +// Copyright (C) 2018 Marcus Cooper <codekip...@gmail.com>
need space, but this doesn't look like Linux sync. better sync it directly w/o any changes, if you need updated license do first in Linux. otherwise, Reviewed-by: Jagan Teki <ja...@openedev.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
