> -----Original Message-----
> From: York Sun
> Sent: 2018年11月21日 0:58
> To: Wen He <wen.h...@nxp.com>; u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; Alison Wang
> <alison.w...@nxp.com>
> Subject: Re: [PATCH 2/2] armv8: ls1043aqds: modify the qspi_bootcmd
> definition
>
> On 11/20/18 12:55 AM, Wen He wrote:
> > Fix the kernel offset of qspi_bootcmd scripts, followed the
> > qoriq_memory_layout definition.
> >
> > Signed-off-by: Wen He <wen.h...@nxp.com>
> > ---
> > include/configs/ls1043a_common.h | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/configs/ls1043a_common.h
> > b/include/configs/ls1043a_common.h
> > index 795e904..7b2f31c 100644
> > --- a/include/configs/ls1043a_common.h
> > +++ b/include/configs/ls1043a_common.h
> > @@ -302,8 +302,8 @@
> > "source ${scriptaddr}\0" \
> > "qspi_bootcmd=echo Trying load from qspi..;" \
> > "sf probe && sf read $load_addr " \
> > - "$kernel_addr $kernel_size; env exists secureboot " \
> > - "&& sf read $kernelheader_addr_r $kernelheader_addr " \
> > + "$kernel_start $kernel_size; env exists secureboot " \
> > + "&& sf read $kernelheader_addr_r $kernelheader_start " \
> > "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
> > "bootm $load_addr#$board\0" \
> > "nor_bootcmd=echo Trying load from nor..;" \
> >
>
> Why do you need to copy the images from QSPI flash? It is directly readable.
> It
> has been this way and it is not your fault. Can you fix it?
>
For now, we only supported DDR loading that need copy the images from
QSPI/NAND/SD/NOR flash.
Will add support directly readable from QSPI and NOR flash in next LSDK.
Best Regards,
Wen
> York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
