> > > > Do any of your above patches get v2 posted? At least I did not see any > > follow-up > > response [1] regarding to "riscv: ax25-ae350: Pass dtb address to u-boot > > with a1 > > register"
First of all you told me about that board_fdt_blob_setup() should be completely removed. Instead the simple fix should be add CONFIG_OF_PRIOR_STAGE to ax25-ae350_defconfig. Then I explain you about that is for booting from flash. And you said In this case, we need support OF_CONTROL like other arch, eg: CONFIG_OF_EMBED and CONFIG_OF_SEPARATE. In README, I don't find the limitation about when booting from flash, it can not use CONFIG_OF_BOARD. That is why ax25-ae350 use CONFIG_OF_BOARD to support boot from RAM and ROM. It is a flexible approach to meet Andes' HW mechanism. I think it is a configuration in ax25-ae350_defconfig. It will not affect qemu-riscv32(64)_defconfig. That is why I do not prepare v2 to modify it as CONFIG_OF_EMBED or CONFIG_OF_SEPARATE as your willingness. B.R Rick > > > > > > [snip] > > > > > > [1] https://lists.denx.de/pipermail/u-boot/2018-October/345903.html > > > > > > Regards, > > > Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
