Dear Kumar Gala, In message <pine.lnx.4.64.1004070223390.21...@localhost.localdomain> you wrote: > The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af: > Wolfgang Denk (1): > Merge branch 'next' > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx master > > Dave Liu (2): > fsl-ddr: Fix the turnaround timing for TIMING_CFG_4 > fsl-ddr: change the default burst mode for DDR3 > > Jerry Huang (1): > fsl_esdhc: Add function to reset the eSDHC controller > > Kumar Gala (6): > fsl_esdhc: Always stop clock before changing frequency > 85xx: Add defines for BUCSR bits to make code more readable > fdt: Add fdt_del_node_and_alias helper > ppc/8xxx: Delete PCI nodes from device tree if not configured > 85xx: Added various P1012/P1013/P1021/P1022 defines > ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size > > Roy Zang (1): > fsl_esdhc: Only modify the field we are changing in WML > > Sandeep Gopalpet (1): > 85xx: Set HID1[mbdd] on e500v2 rev5.0 or greater > > Timur Tabi (2): > fsl: improve the PIXIS code and fix a few bugs > p2020ds: add alternate boot bank support using the ngPIXIS FPGA > > board/freescale/common/Makefile | 1 + > board/freescale/common/ngpixis.c | 136 +++++++++++++ > board/freescale/common/ngpixis.h | 57 ++++++ > board/freescale/common/pixis.c | 254 > ++++++++++++------------- > board/freescale/common/pixis.h | 31 --- > board/freescale/mpc8536ds/mpc8536ds.c | 1 - > board/freescale/mpc8544ds/mpc8544ds.c | 1 - > board/freescale/mpc8572ds/mpc8572ds.c | 1 - > board/freescale/mpc8610hpcd/mpc8610hpcd.c | 2 - > board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 1 - > board/freescale/mpc8641hpcn/mpc8641hpcn.c | 2 - > board/freescale/p2020ds/p2020ds.c | 56 ++---- > common/fdt_support.c | 13 ++ > cpu/mpc512x/diu.c | 1 - > cpu/mpc85xx/Makefile | 4 + > cpu/mpc85xx/release.S | 12 +- > cpu/mpc85xx/start.S | 14 +- > cpu/mpc8xxx/cpu.c | 10 +- > cpu/mpc8xxx/ddr/ctrl_regs.c | 26 ++- > cpu/mpc8xxx/ddr/options.c | 14 +- > cpu/mpc8xxx/pci_cfg.c | 30 +++- > drivers/misc/fsl_law.c | 4 +- > drivers/mmc/fsl_esdhc.c | 37 +++-- > drivers/pci/fsl_pci_init.c | 18 ++- > include/asm-ppc/config.h | 3 +- > include/asm-ppc/processor.h | 12 ++ > include/configs/MPC8536DS.h | 3 + > include/configs/MPC8569MDS.h | 3 + > include/configs/MPC8610HPCD.h | 2 +- > include/configs/P1_P2_RDB.h | 3 + > include/configs/P2020DS.h | 62 +------ > include/fdt_support.h | 1 + > include/fsl_esdhc.h | 6 +- > 33 files changed, 517 insertions(+), 304 deletions(-) > create mode 100644 board/freescale/common/ngpixis.c > create mode 100644 board/freescale/common/ngpixis.h > delete mode 100644 board/freescale/common/pixis.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de All men should freely use those seven words which have the power to make any marriage run smoothly: You know dear, you may be right. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
