Hi Jean-Jacques, > Resending this series after rebasing on top of latest u-boot. > This series applies on top of the series "[PATCH v3 0/7] Improvements > for the dwc3_generic driver" > > Moving to DM_USB and DM_USB_DEV brings some benefits: > - it is required to support DM_ETH and USB network adapters with the > same binary. > - support for USB3 on AM57x comes almost for free > - removal of platform code related to USB > > Tested on: > - dra76 evm > - AM572 evm >
I've tried to merge and test your patches: SHA1: 0c4b382f9041f9f2f00246c8a0ece90dae5451be https://github.com/lmajewski/u-boot-dfu/commits/testing The results from Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/jobs/456736504 It breaks for e.g. OMAP. Could you check this problem and resubmit patches? Thanks in advance, Łukasz > > Changes in v7: > - replace remaining if() statements with ut_assert() > - Fix build issue "multiple definition of > `usb_gadget_handle_interrupts'" > - Fixed build issue "multiple definition of > `usb_gadget_handle_interrupts'" > > Changes in v6: > - ti-pipe3-phy: take PLL out of IDLE in pipe3_init(). The PLL may have > been put into idle by pipe3_exit() > - DRA7 configs: enable DM_USB and DM_USB_DEV. Use DWC3_GENERIC in > place of DWC3_OF_SIMPLE. disable non DM USB options > - AM57 configs: enable DM_USB and DM_USB_DEV. Use DWC3_GENERIC in > place of DWC3_OF_SIMPLE. disable non DM USB options > - Supports DM USB for peripherals > - Removed DTS changes that disabled USB1 on DRA7 because DM_USB_DEV is > now supported > > Changes in v5: > - Rebased on latest u-boot > - Removed patches that have already been merged > > Changes in v4: > - Fix word missing in commit log > - Remove dependency on MISC > - Renamed the commit (DM_USB is already enabled, the only missing > option is for the USB2 phy driver) > - Remove dependency on MISC > - Remove omap specific glue layer and use dwc3-of-simple glue layer > > Changes in v3: > - in syscon_regmap_lookup_by_phandle(), use dev_dbg() instead of > printf() > - added unit test for syscon_regmap_lookup_by_phandle() > > Changes in v2: > - Add USB3 support to ti-pipe3-phy driver > - omap-usb2-phy: Implement power_on and power_off callbacks > - am57xx boards: when DM_USB is used, turn on the required USB clocks > - split dts changes in 2 commits: one for binding the children of > ocp2scp@4a080000, and one to disable USB1 on all DRA7 EVMs > - Enable DM_USB in am57xx_evm_defconfig. USB3 (super speed) is > supported. > > Jean-Jacques Hiblot (9): > syscon: dm: Add a new method to get a regmap from DTS > phy: Add a new driver for OMAP's USB2 PHYs > dwc3-generic: Add support for the TI DWC3 glue > board: ti: dra7xx-evm: turn on USB clocks in late init stage > dts: dra7x: make ocp2scp@4a080000 compatible with simple-bus > configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms > configs: am57xx_evm: Enable DM_USB and DM_USB_DEV > board: ti: dra7-evm: remove USB platform code > board: ti: am57xx: remove USB platform code > > Vignesh R (2): > phy: ti-pip3-phy: Add support for USB3 PHY > board; ti: am57xx: turn on USB clocks > > arch/arm/dts/omap5-u-boot.dtsi | 4 + > arch/sandbox/dts/test.dts | 6 +- > board/ti/am57xx/board.c | 106 ++++------------------ > board/ti/dra7xx/evm.c | 123 ++++--------------------- > configs/am57xx_evm_defconfig | 10 +- > configs/am57xx_hs_evm_defconfig | 10 +- > configs/dra7xx_evm_defconfig | 8 +- > configs/dra7xx_hs_evm_defconfig | 8 +- > drivers/core/syscon-uclass.c | 23 +++++ > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/omap-usb2-phy.c | 196 > ++++++++++++++++++++++++++++++++++++++++ > drivers/phy/ti-pipe3-phy.c | 32 +++++-- > drivers/usb/dwc3/dwc3-generic.c | 85 +++++++++++++++++ > include/syscon.h | 13 +++ > test/dm/syscon.c | 29 ++++++ 16 files changed, 448 > insertions(+), 215 deletions(-) create mode 100644 > drivers/phy/omap-usb2-phy.c > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpdcFsoWi6TV.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
