On Sun, 2018-11-04 at 11:38 +0100, Frank Wunderlich wrote: > Just to be clear...i tested v2 patches on rc1 > (https://github.com/frank-w/u-boot/tree/bpi-r2_v2) they working well. > > v3 have additional depencies (swig,python-dev same on rc1&rc3) and bootargs > seems not to be passed to kernel (rc1=bpi-r2_v3_old and rc3 = bpi-r2_v3)
That's because I remove 'gd->bd->bi_boot_params' in v3, but it seems you use legacy method (ATAGs) to pass parameters. I will add it back. > > Gesendet: Samstag, 03. November 2018 um 09:46 Uhr > > Von: "Frank Wunderlich" <fran...@public-files.de> > > An: s...@chromium.org, "Ryder Lee" <ryder....@mediatek.com> > > Cc: u-boot@lists.denx.de > > Betreff: [U-Boot] mt7623 bootup example > > > > Hi Simon, hi Ryder, > > > > i tried Patches so far, they are working well > > > > https://patchwork.ozlabs.org/patch/992398/ > > > > here my github-repo with steps to build: > > > > https://github.com/frank-w/u-boot > > > > there is a build.sh, which compiles uboot the common way with some > > additions like bootmenu and full environment to load a kernel on BPI-R2 > > > > here are instructions how to prepare SD-Card for boot-up: > > > > https://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:storage#extended_boot-headers > > > > as you see you need 3 Headers on SD-Card (SDMMC_BOOT, BRLYT, Preloader) and > > the uboot.bin for SD-Card. on emmc imho preloader in boot0-block and uboot > > on main-Partition is enough for uboot to boot > > > > Source: > > https://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:uboot#update_uboot > > > > btw. @ryder.lee you have a small typo in the readme: > > Boorom => Bootrom (2 times) Thanks for catching that. > > maybe you can add Infos above from my wiki. Btw. how far is the > > ethernet-driver? then i can replace my 2014-uboot ;) > > OK. Thanks Ryder _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
