Dear David Gibson,
In message <20100401185147.ga17...@yookeroo> you wrote:
>
> > Let me know if we need to increase size of the blob or something which i m
> > missing.
> > This is going to help a lot if you can reply.
>
> For this case where there's a flash partition that's sometimes there
> and sometimes not, it might be simpler to put all the partitions,
> including the not-always-present ones in the dts. Then you can use
> fdt_nop_subnode() to remove the extra one on systems where it's not
> present.
A completely different approach woul dbe NOT to try defining the flash
partitions in the device tree, but use command line partitioning in
combination with the "mtdparts" command support in U-Boot. For
frequently changing configurations this is probably the most flexible
approach.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
But the only way of discovering the limits of the possible is to
venture a little way past them into the impossible.
- _Profiles of the Future_ (1962; rev. 1973)
``Hazards of Prophecy: The Failure of Imagination''
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
