On 17.10.2018 13:27, Rajat Srivastava wrote:
Add functionality to read and parse SFDP parameters to auto-detect
flash size, page size and address width of flash. This enables
flash access above 16MB using 4-byte addressing mode.
Add driver support to get SFDP information of flash and use it to
access flash above 16MB.
Enable reading and parsing of SFDP parameters for Spansion's
s25fs512 flash to auto-detect its size, its page size and the
addressing mode it supports.
Why do you need driver-specific code to read the sfdp parameters?
Wouldn't it be much cleaner to solve this from spi_flash.c only?
If so, just adding the 'spi_flash_parse_sfdp()' function on top of
Stefan's patch should work?
I tried testing this patch, but just like for Stefan, but it just didn't
work for me and I failed to see some simple steps to adjust my spi
driver to make it work.
Simon
Rajat Srivastava (3):
mtd/spi: Add JEDEC SFDP support in SPI framework
fsl_qspi: Access flash above 16MB using SFDP
spi_flash_ids: Enable SFDP parsing for s25fs512 flash
drivers/mtd/spi/sf_internal.h | 4 +
drivers/mtd/spi/spi_flash.c | 297 +++++++++++++++++++++++++++++++++++++---
drivers/mtd/spi/spi_flash_ids.c | 3 +-
drivers/spi/fsl_qspi.c | 103 +++++++++++++-
include/spi.h | 2 +
include/spi_flash.h | 120 ++++++++++++++++
6 files changed, 501 insertions(+), 28 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
